From: Keane, James (James.Keane@agriculture.gov.ie)
Date: Thu Feb 03 2005 - 12:09:32 GMT-3
Wrong !
Ok remember You have
So called Legacy DDR
int bri (point to multi - DialerMaps)
int bri (rotary groups) with int dialer (point to multi - DialerMaps)
and dialer profiles
int bri (dialer pool 1) with int dialer (point to point - dialer string)
People tend to forget about the second Legacy option
I found an example of one that is reasonable easy to follow
http://www.cisco.com/warp/public/793/access_dial/isdn-ppp-callback.html
James
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: 03 February 2005 14:56
To: Group Study
Subject: int dialer without dialer string
Hi guys,
In this task, I'm suppose to configure an isdn connection using dialer
interfaces, but I'm not allowed to use
the dialer string command.
I'm clueless on this.
I can't use a dialer map command on a dialer interface, so how can L3 to L2
resolution be done.
Anybody have any ideas?
TIA, Tim
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:16 GMT-3