From: De Witt, Duane (duane.dewitt@siemens.com)
Date: Wed Feb 02 2005 - 10:01:48 GMT-3
Hi
Both will work (assuming your cache engine is configured appropriately).
The 'Web-cache' is merely a short cut to cache only HTTP (TCP 80). You
can use a number instead (1-99) if you wish to cache protocols other
than or including HTTP)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Gajewski Mariusz
Sent: 02 February 2005 02:04 PM
To: ccielab@groupstudy.com
Subject: wccp
Hi everyone,
when the task says to redirect http requests coming into interface
Fe0/0 (with excluding one station) to web cache engine , what is the
difference between these two :
access-list 10 deny 10.1.1.1
access-list 10 permit any
1)
R3(config)#ip wccp web-cache redirect-list 10
R3(config-if)#ip wccp web-cache redirect in
2)
R3(config)# ip wccp 1 redirect-list 10
R3(config-if)# ip wccp 1 redirect in
Does the solution 2 will also work ? Im little confused about the
second
one , what does service # exactly mean in this case ? Is this just a
proces
# ?
Thanks in advance ,
Mariusz
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:16 GMT-3