From: James Matrisciano (jmatrisciano@kenttech.com)
Date: Tue Feb 01 2005 - 11:51:50 GMT-3
From my perspective, and I know a few guys that can back me up on this
(Bob), I truly was novice prior to my introduction to Netmasters and
DoIT. I was lucky enough to attend their classes up in Va NMC-1 and
NMC-2. I was a constant question asker as a lot of the technology was
beyond my reach in my work environment. After going through their
classes I purchased the DoIT work book. Again, I found myself doing a
lot of searching to figure out what exactly Val P was trying to get me
to accomplish in the various scenarios. But in time (about 3 months for
me, @ 30 hours a week) I truly feel as I have a grasp on what I should
know about the technology. It is more in depth than the actual lab
(about 10 times harder too).
Yes, I have other supporting work books and labs from other vendors, but
for the true challenge, DoIT is the best for me. It is set up like the
actual test, no tasks like "you are the administrator of a five star
hotel...." It is very direct in what it wants you to do. They leave
the options open to see if you are reading ahead to make sure that the
solution you choose will work later. You will know it after you do it!
jm
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
amitjain05@gmail.com
Sent: Tuesday, February 01, 2005 8:48 AM
To: ccielab@groupstudy.com
Subject: How effective is NetMasterClass DoIT
Hi All
Just wanted to get some advise about the pros and cons of using
NetMasterClass Doit labs in CCIE prep. Are they good and how do you rate
its success.
Also if you find any significant drawbacks?
Thanks
This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 08:51:15 GMT-3