From: Lee Donald (Lee.Donald@t-systems.co.uk)
Date: Mon Jan 31 2005 - 08:45:31 GMT-3
I already had a look in there, but could not find anything usefull.
I have 2 ADSL interfaces, cabled together using the purple adsl cable that
comes with them, but both atm int's are down, down.
Any ideas?
-----Original Message-----
From: Walker, James - Is [mailto:JWALKER2@PARTNERS.ORG]
Sent: Friday, January 28, 2005 5:22 PM
To: 'Lee Donald'; Gajewski Mariusz; ccielab@groupstudy.com
Subject: RE: ATM Back to back Question
I've seen this same question before.
Do a search on the archieves for answer.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Lee Donald
Sent: Friday, January 28, 2005 11:59 AM
To: Gajewski Mariusz; Lee Donald; ccielab@groupstudy.com
Subject: RE: ATM Back to back Question
No that didn't work.
Here is my config from BB1 :
interface ATM0/0
no ip address
atm clock INTERNAL
no atm ilmi-keepalive
pvc 0/16 ilmi
!
dsl operating-mode auto
!
interface ATM0/0.51 multipoint
description PVC to Rack1R6 for ATM InARP
ip address 54.1.3.254 255.255.255.0
pvc 0/51
broadcast
!
!
interface ATM0/0.101 point-to-point
description PVC 0/101 to Rack1R6
ip address 54.1.1.254 255.255.255.0
ip router isis 1
ip authentication mode eigrp 10 md5
ip authentication key-chain eigrp 10 EIGRP
pvc 0/101
!
And here is my config from Router 6
interface ATM0/0
ip address 54.1.1.6 255.255.255.0
no atm ilmi-keepalive
pvc 0/101
protocol ip 54.1.1.254 broadcast
!
dsl operating-mode auto
!
Anyone have any tips...?
Regards
Lee.
-----Original Message-----
From: Gajewski Mariusz [mailto:Mariusz.Gajewski@telekomunikacja.pl]
Sent: 28 January 2005 16:52
To: Lee Donald; ccielab@groupstudy.com
Subject: RE: ATM Back to back Question
For back-to-back PVCs you need just "atm clock internal" on one side of atm
link
HTH
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Lee
Donald
Sent: Friday, January 28, 2005 5:44 PM
Subject: ATM Back to back Question
I'm trying to do most of my ATM practice through 2 routers connected
together via their ADSL cards, has anybody tried this?
What do I need in order to accomplish this? I know I need an ATM switch for
SVC's but not for PVC's?
Thanks in advance.
Lee
-----Original Message-----
From: Conte, Charles [mailto:Charles.Conte@nasdaq.com]
Sent: 28 January 2005 16:38
Subject: OT:VPN
Does anybody know if you can use biometrics based authentication with the
3030 Concentrator? I guess it's more important that the VPN client can pass
the variables from the biometric reader. Any information is appreciated.
Thank you!
Charles
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:27 GMT-3