From: Mike Flanagan (mikenoc@mindspring.com)
Date: Thu Jan 27 2005 - 16:20:23 GMT-3
Hello,
The example on the Doc CD for configuring this is ...
ipv6 general-prefix prefix-name {ipv6-prefix/prefix-length | 6to4
interface-type interface-number}
Example:
Router(config)# ipv6 general-prefix my-prefix 6to4 ethernet0
Wouldnt it seems to be missing the actual address, isnt it correct to
configure like
Router(config)# ipv6 general-prefix my-prefix 2002:192.168.0.0::/48
6to4 ethernet0
Is there any reason to actually leave out the address when
configuring this ?
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:26 GMT-3