From: mani poopal (mani_ccie@yahoo.com)
Date: Tue Jan 25 2005 - 08:40:29 GMT-3
James,
If you want to use IRDP, pc's must be irdp aware. I tried vrrp/glbp on old routers(poor 2500 series), no go. Is it possible to define dhcp and set primary gateway and secondary gateway(defaul router)
thanks
Mani
Rodolphe Abou Nassar <rabounassar@dataconsult.com.lb> wrote:
VRRP should be supported on Cisco routers depending on the model and
IOS. I read about that on their CCO once.
What abt GLBP?
Rgds, Rudi
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
James
Sent: Tuesday, January 25, 2005 12:50 PM
To: 'mani poopal'; ccielab@groupstudy.com
Subject: RE: HSRP
What about ICMP router discovery protocol
Conf t
Int f0/0
Ip irdp ?
Hope that helps
Kind regards
James
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
mani poopal
Sent: Tuesday, January 25, 2005 12:43 PM
To: ccielab@groupstudy.com
Subject: HSRP
Hi Guys,
If a scenario asks for gateway redundency without hsrp, what are other
available option. Does VRRP is supported on the routers in the lab(it
is not working on my routers). Guys I dont think that DRP is another
available option because for DRP to work you should have DRP aware
clients.
Any feedback is appreciated.
thanks
Mani
B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
(416)431 9929
MANI_CCIE@YAHOO.COM
---------------------------------
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:25 GMT-3