From: cc ie (davidscottmartin@gmail.com)
Date: Mon Jan 24 2005 - 11:44:50 GMT-3
Hi Ian,
Thanks for your reply. I logged into the Term server(Access Server)
and then reversed into R1 using the word 'R1' . This was all fine at
this point, since I was now connected to R1 from the Term Server. :-)
ok ! moving forward...
However my problem occured when I wanted to leave R1. I tried R1>quit.,
then I tried R1>exit, but niether would release me from R1 iron grip !
So then I tried the sequence you described below Ctrl Shift 6 and X.
This worked ok and I bounced back to the Term Server OK !. However the
sh*t hit the fan when I couldnt reverse back to R1 any more !!!! I
mean never again... :-| ....
Sadly I couldnt reverese back to R1 again ! I dont understand why
Ctrl Shift 6 and X, should prevent me from ever connecting back to R1
again ?
I mean I am happy to use CRT and open several telnet sessions, but i
just wanted to understand how I hossed my LAB with Ctrl Shift 6 and X
?
your advice is appreciated.
cheers
dave
On Mon, 24 Jan 2005 06:31:33 -0500, Ian Stong <istong@stong.org> wrote:
> Hi Dave,
>
> I prefer to telnet to the term server then reverse to each device. You can
> still open up several telnet windows - one to each device if you wish.
>
> As for getting to and from a reverse telnet device - use "Ctrl Shift 6" all
> at once then release them and type "x". From the term server you can track
> your sessions with "show sessions" and you can end a session with
> "disconnect"
>
> Hope that helps,
>
> Ian
> http://www.ccie4u.com
> Rack Rentals and Lab Scenarios starting at only $20
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of cc
> ie
> Sent: Monday, January 24, 2005 1:51 AM
> To: Group Study
> Subject: Help Newbie : IE Rack Rental Usage advice sort ?
>
> Would anybody care to share their IE rack rental experience with me please ?
>
> Do you just login to the AS and jump off from there ? Or do you login
> to each device individually, ie 8 telnet sessions etc,
>
> If you do login to the AS and use a Hostname to jump to a device, for
> example R1, if so how do you jump back to the AS when your done with
> R1 ? I tried quit and exit and i was still at the router prompt,
> R1>quit R1>exit
>
> So I did ctrl-Alt-6, X and hossed my lab completely...(couldnt login
> back into R1)
>
> Any advice would be helpful...thanks in advance..
>
> dave..
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:25 GMT-3