From: Vijaybhasker.Vuppala2@ge.com
Date: Tue Jan 18 2005 - 03:10:03 GMT-3
even for OSPF, I suppose we need to manually define the neighbour
command.....
-----Original Message-----
From: Brian McGahan [mailto:bmcgahan@internetworkexpert.com]
Sent: Monday, January 17, 2005 9:09 AM
To: Radu Pavaloiu; ccielab@groupstudy.com
Subject: RE: IPv6 over F/R
Radu,
Not currently. This feature is known as Inverse Neighbor
Discovery, but isn't currently implemented in Cisco IOS. For IPv6 over
multipoint NBMA configurations you must currently use static layer 3 to
layer 2 resolution. For more information see:
RFC 3122: Extensions to IPv6 Neighbor Discovery for Inverse Discovery
Specification
http://www.internetworkexpert.com/rfc/rfc3122.txt
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> ----- Original Message -----
> From: "Radu Pavaloiu" <Radu.Pavaloiu@connex.ro>
> To: <ccielab@groupstudy.com>
> Sent: Monday, January 17, 2005 8:13 AM
>
>
> > Hi,
> >
> > Is any kind of support of IPv6 FR Inverse-Arp in Cisco Routers ?
> > Seem to not work in a fully meshed FR network.
> >
> >
> >
> > Regards,
> >
> >
> >
> > \'''/
> > (o o)
> > --------------oOOO--(_)--------------------------------------
> > Radu Pavaloiu If There is no way
> > Network Engineer let's Make One
> >
> > CCNP,CCDP,MCSE
> > 302-2658
> > radu.pavaloiu@connex.ro
> > -----------------------------------------oOOO---------------
> > |__|__|
> > || ||
> >
> >
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:23 GMT-3