From: Jeff Kesemeyer \(Bradshaw Labs\) (groupstudy@bellsouth.net)
Date: Sat Jan 15 2005 - 02:12:27 GMT-3
!
ip host r1 2001 10.1.1.1
The 200X number is the line were the router is plugged into 2001 being
serial0, the first tty connection.
The numbering starts at 2000, You can verify the tty ports with sh line.
ip host r2 2002 10.1.1.1
ip host r3 2003 10.1.1.1
!
line 1 16
no exec
no motd-banner
transport input all
!
You need serial ports on the router you will be using as an access server,
the cables will then be going into the console ports on the routers.
Jeff Kesemeyer
CCNP, CCDP, MCSE, CNE
www.bradshawlabs.com
"Your CCIE Rack Rental Source"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of John
Matus
Sent: Friday, January 14, 2005 6:09 PM
To: ccielab@groupstudy.com
Subject: reverse telnet config for console ports
i don't have any of my reference material w/ me....out in the field.
how do you configure a router of reverse telent connections? can you do it
with console ports instead of async ports?
i'm know that you need:
ip host r1 1.2.3.4
line vty 0 4
transport input all
?
telnet r1 <port>...? is the port arbitrary? 1001, 1002
i can't completely remember. can someone help me out w/ this?
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:23 GMT-3