From: Radu Pavaloiu (Radu.Pavaloiu@connex.ro)
Date: Thu Jan 13 2005 - 16:08:04 GMT-3
It's works:
R1
interface Loopback1
ip address 1.1.1.1 255.255.255.255
ip nat inside
!
interface FastEthernet0/0
ip address 192.168.1.1 255.255.255.0 secondary
ip address 10.0.0.1 255.255.255.0
ip nat outside
duplex auto
speed auto
router bgp 100
no synchronization
bgp log-neighbor-changes
neighbor 192.168.1.2 remote-as 100
no auto-summary
!
ip local policy route-map bgp
ip nat inside source static 10.0.0.1 192.168.1.1 extendable
ip http server
ip classless
!
!
!
access-list 100 permit tcp any any eq bgp
!
route-map bgp permit 10
match ip address 100
set interface Loopback1
R2
interface FastEthernet0/0
ip address 192.168.1.2 255.255.255.0 secondary
ip address 10.0.0.2 255.255.255.0
duplex auto
speed auto
router bgp 100
no synchronization
bgp log-neighbor-changes
neighbor 192.168.1.1 remote-as 100
no auto-summary
R1#show ip bgp summary
BGP router identifier 10.0.0.1, local AS number 100
BGP table version is 1, main routing table version 1
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
State/PfxRcd
192.168.1.2 4 100 19 19 1 0 0 00:03:54
0
R2#show ip bgp summary
BGP router identifier 2.2.2.2, local AS number 100
BGP table version is 1, main routing table version 1
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
State/PfxRcd
192.168.1.1 4 100 23 23 1 0 0 00:07:33
0
R1#show ip nat translations
Pro Inside global Inside local Outside local Outside
global
--- 192.168.1.1 10.0.0.1 --- ---
tcp 192.168.1.1:11011 10.0.0.1:11011 192.168.1.2:179
192.168.1.2:179
Regards,
I die. I fracture into thousands of fragments of flushed embarrassment.
My body parts fly, connectionless, over a badly constructed spanning
tree that isn't quite loop free.
I fall screaming into 127.0.0.1.
Radu
#2658
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Alexander Arsenyev (GU/ETL)
Sent: Thursday, January 13, 2005 8:00 PM
To: 'Vazman@aol.com'; Group Study
Subject: RE: BGP peering using secondary IP addresses ?!...
Hello,
My take on it:
1) PBR to loopback - "ip local policy route-map" and route-map should
have match on BGP and "set interface LoXX"
2) "ip nat inside" on that loopback
3) "ip nat inside source static" to translate primary into secondary
4) "ip nat outside" on the outgoing interface
Don't have a rack to test it at the moment :-]
Anyone tell me why it shouldn't work?
HTH,
Cheers
Alex
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]
Sent: 13 January 2005 17:33
To: micsoniu@telus.net; Group Study
Subject: Re: BGP peering using secondary IP addresses ?!...
By default, BGP will use the IP address of the outgoing interface as the
source. The command "update-source" does not apply in this case as the
interface is still the same. The only thing that I can think of is to
use the BGP peering address as the primary address.
Good scenario btw.
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:22 GMT-3