From: Geert Nijs (geert.nijs@simac.be)
Date: Thu Jan 13 2005 - 13:03:33 GMT-3
Hi group,
Topology: 2 routers with a connection to two ISPs. Inside default gateway is a HSRP address.
For redundancy reasons i have configured HSRP with tracking. However, i would like to track a BGP session, not an
interface. The reason for this is clear: the BGP session can die, while the interface remains up. HSRP would not switch in this
case. Any ideas on how to accomplish this ?
- interface tracking - nope
- tracking with SAA (ping, TCP) - not really - i could track the possibility of TCP to the remote peer...but that is not the same as tracking the existing BGP session.
Regards,
Geert
#####################################################################################
This e-mail and any attached files are confidential and may be legally privileged.
If you are not the addressee, any disclosure, reproduction, copying, distribution,
or other dissemination or use of this communication is strictly prohibited.
If you have received this transmission in error please notify Simac immediately
and then delete this e-mail.
Simac has taken all reasonable precautions to avoid virusses in this email.
Simac does not accept liability for damage by virusses, for the correct and complete
transmission of the information, nor for any delay or interruption of the transmission,
nor for damages arising from the use of or reliance on the information.
All e-mail messages addressed to, received or sent by Simac or Simac employees
are deemed to be professional in nature. Accordingly, the sender or recipient of
these messages agrees that they may be read by other Simac employees than the official
recipient or sender in order to ensure the continuity of work-related activities
and allow supervision thereof.
#####################################################################################
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:22 GMT-3