From: Oliver Grenham (ogrenham@optusnet.com.au)
Date: Tue Jan 11 2005 - 10:38:38 GMT-3
an ospf interface that is set is point-to-multipoint does not elect a
designated router or a backup designated router so dont believe priority
will do much to make this work.
Ollie.
----- Original Message -----
From: "ccie2be" <ccie2be@nyc.rr.com>
To: <steve.skinner@uk.pwc.com>
Cc: <ccielab@groupstudy.com>
Sent: Tuesday, January 11, 2005 6:44 PM
Subject: Re: osfp over isdn using unicasts
> Actually, I haven't but I wouldn't think that would be
>
> needed as I hard-coded the router-id on each side.
>
> Did you find priority needs to be changed to make this work?
>
> Thanks
> ----- Original Message -----
> From: <steve.skinner@uk.pwc.com>
> To: "ccie2be" <ccie2be@nyc.rr.com>
> Cc: <ccielab@groupstudy.com>
> Sent: Tuesday, January 11, 2005 4:40 AM
> Subject: Re: osfp over isdn using unicasts
>
>
> >
> > Hi ,
> >
> > have you tried changing the priority on one end of the link ...
> >
> > i.e ip ospf priority 0
> >
> > HTH
> >
> > Stephen Skinner
> >
> >
> >
> >
> >
> > "ccie2be"
> > <ccie2be@nyc.rr.com To: "Group Study"
> <ccielab@groupstudy.com>
> > > cc:
> > Sent by: Subject: osfp over isdn
> using unicasts
> > nobody@groupstudy.c
> > om
> >
> >
> > 11/01/2005 04:14
> >
>
> >
> >
> > Please respond to
> > "ccie2be"
> >
> >
> >
> >
> >
> >
> > Hi guys,
> >
> > Has anyone gotten this to work?
> >
> > This is from IEWB lab 15, task 5.21.
> >
> > According to IE, the config should be fairly simple and like this:
> >
> >
> > R4
> > int bri 0/0
> > ip ospf network point-to-multipoint non-broadcast
> > dialer map ip 130.1.45.5 name ROUTER5 5555
> >
> > ROUTER OSPF 1
> > net 130.1.45.0 0.0.0.255 area 345
> > neighbor 130.1.45.5
> >
> > R5
> >
> > int bri 0/0
> > ip ospf network point-to-multipoint non-broadcast
> > dialer map ip 130.1.45.4 name ROUTER5 4444
> >
> > ROUTER OSPF 1
> > net 130.1.45.0 0.0.0.255 area 345
> >
> >
> > Before changing to the above the config, I had established an ospf
> > adjacency
> >
> > between R4 and R5. But, once I changed the config to the above,
> >
> > the ospf adjacency flapped between down and init.
> >
> > Any one have any ideas on what is needed to make this work.
> >
> > TIA, Tim
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> > _________________________________________________________________
> > --------------------- End of message text --------------------
> >
> > Get the PwC Annual Report http://www.pwc.com/uk/annualreport
> >
>
> --------------------------------------------------------------------------
> > This e-mail is intended only for the person to whom it is addressed. If
> an
> > addressing or transmission error has misdirected this e-mail, please
> notify
> > the author by replying to this e-mail. If you are not the intended
> > recipient you must not use, disclose, print or rely on this e-mail.
> >
> > PricewaterhouseCoopers LLP is a limited liability partnership registered
> in
> > England with registered number OC303525. The registered office of
> > PricewaterhouseCoopers LLP is 1 Embankment Place, London WC2N 6RH.
> > PricewaterhouseCoopers LLP is authorised and regulated by the Financial
> > Services Authority for designated investment business.
> >
> > PricewaterhouseCoopers LLP may monitor outgoing and incoming
> > e-mails and other telecommunications on its e-mail and
> > telecommunications systems. By replying to this e-mail you
> > give your consent to such monitoring.
> >
> > ----------------------------------------------------------------
> > Visit our website http://www.pwc.com/uk
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:21 GMT-3