From: marvin greenlee (marvin@ccbootcamp.com)
Date: Tue Jan 11 2005 - 02:16:51 GMT-3
Works fine for me. What do 'debug ip ospf adj' and 'debug ip packet detail'
show you? Did you try saving configs and reloading your routers?
- Marvin Greenlee, CCIE#12237, CCSI# 30483
Network Learning Inc
marvin@ccbootcamp.com
www.ccbootcamp.com (Cisco Training)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2be
Sent: Monday, January 10, 2005 8:14 PM
To: Group Study
Subject: osfp over isdn using unicasts [bcc][faked-from][bayes]
Importance: Low
Hi guys,
Has anyone gotten this to work?
This is from IEWB lab 15, task 5.21.
According to IE, the config should be fairly simple and like this:
R4
int bri 0/0
ip ospf network point-to-multipoint non-broadcast
dialer map ip 130.1.45.5 name ROUTER5 5555
ROUTER OSPF 1
net 130.1.45.0 0.0.0.255 area 345
neighbor 130.1.45.5
R5
int bri 0/0
ip ospf network point-to-multipoint non-broadcast
dialer map ip 130.1.45.4 name ROUTER5 4444
ROUTER OSPF 1
net 130.1.45.0 0.0.0.255 area 345
Before changing to the above the config, I had established an ospf adjacency
between R4 and R5. But, once I changed the config to the above,
the ospf adjacency flapped between down and init.
Any one have any ideas on what is needed to make this work.
TIA, Tim
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:21 GMT-3