From: Jim (quangnn@hptvietnam.com.vn)
Date: Tue Jan 11 2005 - 01:53:03 GMT-3
How can i verify the operation of DLSW fail redundance with cost?
I just want to know which peer is in active and which one is in idle state?
All of the sh dlsw commands reveal nothing but the cost of the other peers.
R2
dlsw local-peer peer-id 192.168.2.2 promiscuous
dlsw bridge-group 1
R5
dlsw local-peer peer-id 192.168.5.5 cost 5
dlsw remote-peer 0 tcp 192.168.2.2
dlsw bridge-group 1
R6
dlsw local-peer peer-id 192.168.6.6 cost 2
dlsw remote-peer 0 tcp 192.168.2.2
dlsw bridge-group 1
R2
r2#sh dlsw capabilities
DLSw: Capabilities for peer 192.168.5.5(2065)
vendor id (OUI) : '00C' (cisco)
version number : 2
peer group number : 0
peer cluster support : no
border peer capable : no
peer cost : 5
biu-segment configured : no
configured ip address : 192.168.5.5
DLSw: Capabilities for peer 192.168.6.6(2065)
vendor id (OUI) : '00C' (cisco)
peer cluster support : no
border peer capable : no
peer cost : 2
biu-segment configured : no
UDP Unicast support : yes
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:21 GMT-3