From: Lai, Ben (benlai_cn@hotmail.com)
Date: Sun Jan 09 2005 - 22:50:33 GMT-3
Hi all:
Is there anybody used to configure PORT-SECURITY and HSRP?
The scenario is: there are two router connected with a CAT 3550 switch,
running HSRP,
When I configuration HSRP on the two routers and PORT-SECURITY on the 3550
switch, the problem occurs:
The configuration of the 3550 switch is as follow:
For example:
interface FastEthernet0/1
switchport access vlan 2
switchport mode access
switchport port-security
switchport port-security maximum 2
switchport port-security aging time 1
switchport port-security violation restrict
switchport port-security mac-address sticky 1111.1111.1111
switchport port-security mac-address sticky AAAA.AAAA.AAAA(as the virtual
mac of HSRP)
interface FastEthernet0/3
switchport access vlan 2
switchport mode access
switchport port-security
switchport port-security maximum 2
switchport port-security aging time 1
switchport port-security violation restrict
switchport port-security mac-address sticky 2222.2222.2222
the switch prompts error message with the virtual MAC address of HSRP.
How to deal with this?
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:21 GMT-3