From: Rick (rick@iptool.net)
Date: Sun Jan 09 2005 - 01:16:00 GMT-3
The default encapsulation for the BRI interfaces is HDLC. If you are using
PPP on the dialer you should change it on the Physical as well. You will
notice more than just this doesn't work if you always leave the physical to
HDLC.
Rick
----- Original Message -----
From: "Gene Thorne" <gthorne@netcogov.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, January 08, 2005 7:15 PM
Subject: encap ppp, dialer interfaces and pap
> The ISDN section IE lab 4 uses dialer interfaces. R4 authenticates R5 via
> PAP, and R5 authenticates R4 via CHAP. I set this up with "encap ppp" on
the
> dialer interfaces and the default encapsulation on the physical
interfaces,
> and entered the appropriate authentication commands. The line came up
fine,
> but in looking at the debugs (debug ppp nego) I found that while the CHAP
> authentication worked, the PAP authentication exchange never took place.
It
> didn't fail, it just never happened. When I put encap ppp on the R4
physical
> interface as well as on the dialer interface, the PAP exchange occurred as
> expected.
>
> Is this normal behavior or something peculiar with the 2500s I was using?
> Any rules for deciding when to put the encap ppp on the dialer interface,
> the BRI, or both?
> -gt
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:20 GMT-3