IPv6 on Lab

From: mariusz.gajewski@telekomunikacja.pl
Date: Fri Jan 07 2005 - 06:02:52 GMT-3

• Next message: fferrer10@vodafone.es: "Re: conditional NAT"
• Previous message: reo@chavallos.net: "Re: IEWB Lab 2 Task 9.10"
• Next in thread: Scott Morris: "RE: IPv6 on Lab"
• Maybe reply: Scott Morris: "RE: IPv6 on Lab"
• Maybe reply: Gajewski Mariusz: "RE: IPv6 on Lab"
• Maybe reply: Scott Morris: "RE: IPv6 on Lab"
• Maybe reply: Gajewski Mariusz: "RE: IPv6 on Lab"
• Maybe reply: Church, Chuck: "RE: IPv6 on Lab"
• Maybe reply: James Matrisciano: "RE: IPv6 on Lab"
• Maybe reply: Church, Chuck: "RE: IPv6 on Lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

 Hi everyone,
according to the blueprint , there is no IPv6 in sections like :
Bridging/Switching, Dial, IP/IOS Features, Multicast and Security. I found
that only IGP/EGP routing and QoS are affected.
Is my assumption correct that only those areas that are listed will be
tested ?
More on that , Mcast for IPv6 is available from v12.3T but the current tested version is 12.2T , am I missing something here ?

 cheers,
 Mariusz

• Next message: fferrer10@vodafone.es: "Re: conditional NAT"
• Previous message: reo@chavallos.net: "Re: IEWB Lab 2 Task 9.10"
• Next in thread: Scott Morris: "RE: IPv6 on Lab"
• Maybe reply: Scott Morris: "RE: IPv6 on Lab"
• Maybe reply: Gajewski Mariusz: "RE: IPv6 on Lab"
• Maybe reply: Scott Morris: "RE: IPv6 on Lab"
• Maybe reply: Gajewski Mariusz: "RE: IPv6 on Lab"
• Maybe reply: Church, Chuck: "RE: IPv6 on Lab"
• Maybe reply: James Matrisciano: "RE: IPv6 on Lab"
• Maybe reply: Church, Chuck: "RE: IPv6 on Lab"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:19 GMT-3