From: Edwards, Andrew M (andrew.m.edwards@boeing.com)
Date: Wed Jan 05 2005 - 15:01:33 GMT-3
Anthony,
Using Tims command below will show "authenticated".
Also, you can do "debug ntp authentication"
HTH,
andy
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: Wednesday, January 05, 2005 4:47 AM
To: Anthony Sequeira; Cisco certification
Subject: Re: NTP Authentication
Use the show ntp asso det and/or show ntp staus
If authentication is not working, you wont be in sync.
----- Original Message -----
From: "Anthony Sequeira" <terry.francona@gmail.com>
To: "Cisco certification" <ccielab@groupstudy.com>
Sent: Tuesday, January 04, 2005 11:44 PM
Subject: NTP Authentication
> NTP authentication sure seems simple to implement - but how in the
> world would you verify that it is actually working?
>
> ______________________________________________________________________
> _
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:18 GMT-3