From: David Duncon (david_ccie@hotmail.com)
Date: Wed Jan 05 2005 - 07:40:09 GMT-3
True . I was meaning H323 Gateway Signaling earlier when I said TCP 1720.
An the reason why I was putting across my original question regarding
Alcatel IP 4035 phones was , we do have an issue with one of my tail sites
where I got 40 odd Cisco 7960s in one department and 20 odd Alcatel 4035s (
we just want to try different vendor products to see the relevant cost
benefit analysis) in another department. And we do have WAN redundancy
between this tail site to the HUB where CM is located.
Now the problem we are having is , when ever the primary Frame goes down ,
dialer watch kicks in and triggers the back up onramp30. And during that
process all Cisco IP phones will happily work till the IP routing resumes in
via ISDN backup. Meaning their signaling is intact.
But our Alcatel IP 4035 IP phones do have problem and when ever our primary
Frame goes down , the phones drops out for a minute or 2 before come online
again. And I do suspect that for some reason my current MQC signaling ACL
may NOT be protecting the Alcatel's IP phones. And simple reason could be
these guys may be using different set of Signaling ports ( I am currently
matching TCP 1720 , TCP 2000 and TCP gt 3000) all together.
So I am not 100% on whether these signaling ports are "Vendor specific" or
they universally same across all Voice players such as Cisco , Avaya and
Alcatel..et
So I appreciate if any one confirm this :-)
Cheers
- David.
>From: Richard Dumoulin <Richard.Dumoulin@vanco.fr>
>To: David Duncon <david_ccie@hotmail.com>, ccielab@groupstudy.com
>Subject: RE : Alcatel 4035 IP Phones
>Date: Wed, 5 Jan 2005 08:19:47 -0000
>
>TCP port 1720 is used for h323 I think. RTCP uses the odd ports in the same
>range as RTP,
>
>-- Richard
>
>-----Message d'origine-----
>De : David Duncon [mailto:david_ccie@hotmail.com]
>Envoyi : Wednesday, January 05, 2005 4:15 AM
>@ : ccielab@groupstudy.com
>Objet : Alcatel 4035 IP Phones
>
>Hi Group,
>
>
>I was wondering what UDP port range (for RTP) and TCP port range (for RTCP)
>does Alcatel 4035 IP phones use ?
>
>I am not sure on whether or not these ports are "vendor" specific ?
>
>And like Cisco IP phones use udp 16384 to 32768 (for RTP) and tcp 1720 (for
>RTCP) , I would like to know ports the Alcatel 4035 IP phones use ?
>
>
>Cheers
>
>- David
>
>_________________________________________________________________
>Click here for the latest chart ringtones:
>http://ringtones.com.au/ninemsn/control?page=/ninemsn/main.jsp
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
>
>
>**********************************************************************
>Any opinions expressed in the email are those of the individual and not
>necessarily the company. This email and any files transmitted with it are
>confidential and solely for the use of the intended recipient. If you are
>not the intended recipient or the person responsible for delivering it to
>the intended recipient, be advised that you have received this email in
>error and that any dissemination, distribution, copying or use is strictly
>prohibited.
>
>If you have received this email in error, or if you are concerned with the
>content of this email please e-mail to: e-security.support@vanco.info
>
>The contents of an attachment to this e-mail may contain software viruses
>which could damage your own computer system. While the sender has taken
>every reasonable precaution to minimise this risk, we cannot accept
>liability for any damage which you sustain as a result of software viruses.
>You should carry out your own virus checks before opening any attachments
>to this e-mail.
>**********************************************************************
>
This archive was generated by hypermail 2.1.4 : Wed Feb 02 2005 - 22:10:18 GMT-3