From: mani poopal (mani_ccie@yahoo.com)
Date: Thu Dec 30 2004 - 10:03:27 GMT-3
mani poopal <mani_ccie@yahoo.com> wrote:
Hi Guys,
Look at the following config of dlsw where the hub, R1 has 2 vlans(e0-vlan5 and e1-vlan-10). Now requrement says spoke R2 must make dlsw session with vlan 5 and spoke R3 must make dlsw session with vlan 10.
R1 configs:
dlsw local-peer peer-id 10.1.1.1
dlsw bgroup-list 1 bgroups 1
dlsw bgroup-list 2 bgroups 2
dlsw remote-peer 1 tcp 10.2.2.2<--Look for 1 and 2 numbers
dlsw remote-peer 2 tcp 10.3.3.3
dlsw bridge-group 1
dlsw bridge-group 2
bridge 1 protocol ieee
bridge 2 protocol ieee
e0 -if)#dlsw bridge-group 1<--vlan5
e1 -if)#dlsw bridge-group 2<--vlan10
R2 configs:(connecting to vlan 5 of R1)
dlsw local-peer peer-id 10.2.2.2
dlsw remote-peer 0 tcp 10.1.1.1
dlsw bridge-group 1
bridge 1 protocol ieee
e0 -if)#bridge-group 1
R3 configs:(connecting to vlan10 of R1)
dlsw local-peer peer-id 10.3.3.3
dlsw remote-peer 0 tcp 10.1.1.1<--Note is 0 tcp
dlsw bridge-group 1
bridge 1 protocol ieee
e0 -if)#bridge-group 1
Now my question, since R3 is connecting to vlan 10 of R1(belongs to bgroups 2), is my config for R3 is right or it should be dlsw bridge-group 2/ bridge 2 protocol ieee and bridge-group 2. Any clarification regarding this configuration is appreciated.
thanks
Mani
B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
(416)431 9929
MANI_CCIE@YAHOO.COM
---------------------------------
Do you Yahoo!?
Yahoo! Mail - Easier than ever with enhanced search. Learn more.
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:32 GMT-3