From: ccie2be (ccie2be@nyc.rr.com)
Date: Mon Dec 27 2004 - 10:01:36 GMT-3
Hey guys,
I had the impression that PagP could be used to automatically create a L2
Etherchannel by just configuring one side of the link,
but I couldn't get it to work.
Here's the topology:
Cat-1 ----- Cat-2
Both 3550's are connected to each other via 3 links
fa0/13 --- fa0/13
fa0/14 --- fa0/14
fa0/15 --- fa0/15
and each interface starts out with the default configuration
I used the command on Cat-1, channel-group 1 mode desirable, on all 3
interfaces. But, until I also configured Cat-2 the
etherchannel wouldn't come up.
Do both sides of an etherchannel always have to be configured for the
etherchannel to come up?
If not, how should etherchannel be configured on one side so that the other
side comes up?
If so, what's the point of PagP?
TIA, Tim
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:30 GMT-3