From: ccie2be (ccie2be@nyc.rr.com)
Date: Wed Dec 22 2004 - 06:30:20 GMT-3
Hey Larry,
Thanks for your response, but where's the 802.1x authentication in your
config?
I know how to config a voice vlan, but what I didn't know was how to do it
with 802.1x authentication as described below.
Tim
----- Original Message -----
From: "Larry Letterman" <lletterm@cisco.com>
To: "ccie2be" <ccie2be@nyc.rr.com>
Cc: "Group Study" <ccielab@groupstudy.com>
Sent: Wednesday, December 22, 2004 12:49 AM
Subject: Re: voice vlan
> interface FastEthernet0/1
> switchport trunk encapsulation dot1q
> switchport trunk native vlan 152
> switchport trunk allowed vlan 1,152,155,1002-1005
> switchport mode trunk
> switchport voice vlan 155
> no ip address
> spanning-tree portfast
>
> ############################
> Larry Letterman
> Cisco Systems
> ############################
> ----- Original Message -----
> From: "ccie2be" <ccie2be@nyc.rr.com>
> Cc: "Group Study" <ccielab@groupstudy.com>
> Sent: Tuesday, December 21, 2004 5:19 PM
> Subject: Fw: voice vlan
>
>
> > Hi guys,
> >
> > How should 802.1x be configured when you have this scenario?
> >
> > PC --- IP Phone ---- Cat3550
> >
> > The port connecting the ip phone has a voice vlan configured on it
> >
> > and you want the PC to authenticate but not the ip phone.
> >
> > I checked the documentation on this but it's very unclear.
> >
> > TIA, Tim
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:29 GMT-3