From: Adebola Adegbonmire [ MTN - UBA ] (AdebolaA@mtnnigeria.net)
Date: Wed Dec 22 2004 - 04:51:20 GMT-3
I have no labbed it, but I believe you can as long as you a DCHP relay agent
on the side of the PIX where the DHCP client is. The reason being that the
PIX will not allow broadcast packets through. So you will need the agent to
direct it to a unicast address and open the UDP port on PIX, etc. It should
work if you set it up and try it.
Bola
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Sergio Silva
Sent: 21 December 2004 16:02
To: ccielab@groupstudy.com
Subject: DHCP
Hi Everyone
I have a little question, is it possible to get a dhcp address from a
server sitting behind a PIX firewall instead of using a dial pool or
async group?
Thanks in advance,
Sergio Silva
Internet solutions
Network Systems Engineer
Land Line 011 5751944
Fax 011 5761944
CCNP, CCDP, NNCSS
Please note: This email and its content are subject to the disclaimer as
displayed at the following link http://www.is.co.za/disc.asp. Should you not
have Web access, send a mail to disclaimers@is.co.za and a copy will be
emailed to you.
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:29 GMT-3