From: Andrew Lee Lissitz (alissitz@corvil.com)
Date: Tue Dec 21 2004 - 12:10:07 GMT-3
Hey All,
As far as I know interactive mode only allows you to choose the protocol
(ppp or slip) and gives you a prompt to type in a selection. I do not see a
need for this mode today.
The mode can be changed from dedicated to interactive with the command async
mode. Are you requesting configs for interactive mode or working configs
for back to back?
On a side note; I tried using back to back and got it working... however it
was only a little better than a typing practice. It did not teach me much
and was very limited in features ... I then bought a vconsole isdn simulator
from www.vconsole.com and have been very happy with it. Very close to the
real thing!
Kindest Regards everyone,
Andrew
www.corvil.com --> ip certainty
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
hktco
Sent: Tuesday, December 21, 2004 5:56 AM
To: Cisco@Groupstudy.com; Cisco certification
Subject: Can I do dial-on-demand on 2 aux ports?
Hi,
My goal is to use 2 aux ports of 2610's to practice DDR. Can I use the 2 aux
ports to practice Dial-on-demand without having ISDN WIC's and an ISDN
simulator? I managed to use the 2 ports to do routing using dedicated mode,
but have no ideas how to use interactive mode can serve my goal (if ever
possible).
Sample config would be nice. Thanks!
hktco
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:29 GMT-3