From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Mon Dec 20 2004 - 15:46:30 GMT-3
Jeff,
For the 2500s you want the highest 12.1T Enterprise Plus
version. See this post on our forum for more information:
http://forum.internetworkexpert.com/ubbthreads/showflat.php?Cat=3&Number
=5171&page=0&view=collapsed&sb=5&o=&fpart=1
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Golia, Jeff
> Sent: Monday, December 20, 2004 11:45 AM
> To: 'Brian McGahan'; Lee Carter; CCIE LAB
> Subject: RE: Best IOS to use for LAB 12.2T
>
> Brian and Lee,
>
> In this same vein,
>
> What is the best IOS to run for the 2500 series? My lab is all
cheaper
> equipment (except those switches!)
>
> 2501 2501 2503 2509 2513 2514 2523
>
> They are all 16/16, and running c2500-is-l.122-8.T.bin
>
> Is there a better IOS for the 2500 series closer to the lab?
Filename?
>
> Thanks a lot.
> Jeff
>
>
>
>
>
> -----Original Message-----
> From: Brian McGahan [mailto:bmcgahan@internetworkexpert.com]
> Sent: Monday, December 20, 2004 11:13 AM
> To: Lee Carter; CCIE LAB
> Subject: RE: Best IOS to use for LAB 12.2T
>
>
> Lee,
>
> I would recommend that you run the latest 12.2T Enterprise Basic
> IOS on the 2600s. To see exactly what you are missing out of this
> image, compare it to the same release of the Enterprise Plus feature
set
> of the 2600XMs or the 3640/3660. You can do this side-by-side
> comparison using the Feature Navigator tool on CCO:
> http://www.cisco.com/go/fn/
>
>
> HTH,
>
> Brian McGahan, CCIE #8593
> bmcgahan@internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 705
> Outside US: 775-826-4344 x 705
> 24/7 Support: http://forum.internetworkexpert.com
> Live Chat: http://www.internetworkexpert.com/chat/
>
>
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > Lee Carter
> > Sent: Saturday, December 18, 2004 11:31 AM
> > To: CCIE LAB
> > Subject: Best IOS to use for LAB 12.2T
> >
> > Hi all,
> >
> > I am finalizing my lab and wanted to know what version
> > of code you recomend running on the routers. I have
> > the following:
> >
> > 5 * 2610's (not XM's) 16/64
> > 1 * 3640 Frame/Switch Not much memory
> > 2 * 1720's Back Bone Routers Not much memory
> > 4 * 4500M's 16/32
> >
> > I am trying to find a 12.2.xT image for them to use so
> > I have support for ipv6 but all the 2600 images are
> > differed due to bugs. Also, on tbe 4500's if I go to a
> > T Train I have to give up Enterprise Plus and go to
> > somethign like Enterprise Basic.
> >
> > Any advice is greatly appreciated.
> >
> > Thanks,
> >
> > Lee
> >
> >
> >
> > __________________________________
> > Do you Yahoo!?
> > Send holiday email and support a worthy cause. Do good.
> > http://celebrity.mail.yahoo.com
> >
> >
>
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:28 GMT-3