From: Eric Hoffman (skeetin@hotmail.com)
Date: Mon Dec 20 2004 - 11:31:47 GMT-3
If it is a brand new pix, then it will allow you to connect to PDM on the
inside interface, with no configs.... fresh out of the box. You don't have
to do any other configs to make it work.
If you can send a show ver to ensure the des/3des is enabled, we can go from
there...
E
>From: "Kevin Minihane" <kevin.minihane@eirteic.com>
>To: "'Eric Hoffman'" <skeetin@hotmail.com>
>CC: <ccielab@groupstudy.com>
>Subject: RE: OT:Connectivity to pix 515E
>Date: Mon, 20 Dec 2004 14:07:58 -0000
>MIME-Version: 1.0
>Received: from border01.eirteic.com ([83.137.25.66]) by
>mc10-f15.hotmail.com with Microsoft SMTPSVC(6.0.3790.211); Mon, 20 Dec 2004
>05:05:59 -0800
>Received: from mail.eirteic.com by border01.eirteic.com via smtpd
>(for mc10.bay6.hotmail.com [65.54.166.230]) with ESMTP; Mon, 20 Dec 2004
>14:08:05 +0000
>Received: by mail.eirteic.com (Postfix, from userid 65534)id 05D1195806C;
>Mon, 20 Dec 2004 14:08:04 +0000 (GMT)
>Received: from EirteicFirewallCluster-c0a85344.eirteic.com
>(EirteicFirewallCluster-c0a85344.eirteic.com [192.168.83.68])by
>mail.eirteic.com (Postfix) with ESMTPid 1B71495806A; Mon, 20 Dec 2004
>14:08:03 +0000 (GMT)
>Received: from [212.17.54.222] ([212.17.54.222]) by
>EirteicFirewallCluster-c0a85344.eirteic.com via smtpd (for
>mail.eirteic.com [192.168.83.71]) with ESMTP; Mon, 20 Dec 2004 14:08:03
>+0000
>X-Message-Info: JGTYoYF78jHyAyjNCiGJ6Eq9p3hrdzM2Myk01T+sBdc=
>X-Mailer: Microsoft Office Outlook, Build 11.0.5510
>X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2180
>Thread-Index: AcTmmvYDJGL2uEz/QRyE887tKgnpzQAAPGpg
>X-Spam-Checker-Version: SpamAssassin 2.64 (2004-01-11) on mail.eirteic.com
>X-Spam-Level: X-Spam-Status: No, hits=-4.0 required=5.0
>tests=AWL,BAYES_00,NORMAL_HTTP_TO_IP autolearn=no version=2.64
>Return-Path: kevin.minihane@eirteic.com
>X-OriginalArrivalTime: 20 Dec 2004 13:05:59.0406 (UTC)
>FILETIME=[A65FC8E0:01C4E694]
>
>Hi Eric
>
>I've tried that, but to no avail. I've also tried permitting all traffic
>through the inside and outside interfaces , using an acl, but again, I am
>having no luck
>
>I've even tried setting up the PIX as a DHCP server, and grabbing an
>address
>from the pool of addresses.
>
>By the way, it was a typo on my part, not including the 's' (https) when I
>sent my original mail
>
>Anyone have any other ideas?
>
>Thanks again
>
>Kevin
>
>-----Original Message-----
>From: Eric Hoffman [mailto:skeetin@hotmail.com]
>Sent: 20 December 2004 13:50
>To: kevin.minihane@eirteic.com
>Cc: ccielab@groupstudy.com
>Subject: RE: OT:Connectivity to pix 515E
>
>Hi,
>
>You should use:
>https://192.168.1.1
>
>instead of
>
> >
> >http://192.168.1.1/startup.html
>
>Hope this helps,
>Eric
>13843
>
>
> >
> >Hi
> >
> >
> >
> >I'm having a few problems connecting to a PIX 515E. I want to use PDM as
> >I'm not very confidant with PIX technology.
> >
> >Every Cisco site/document I've read tells me I can connect to the inside
> >interface (which by default has an IP address of 192.168.1.1/24) as long
>as
> >I connect it to a hub/switch, and give my PC an address in the same
> >subnet./
> >I've done this, but am still unable to connect to
> >http://192.168.1.1/startup.html as the documents say
> >
> >
> >
> >Does anyone have any idea on what may be wrong? This is a brand new pix
>,
> >out of the box, with a default installation.
> >
> >
> >
> >I'd greatly appreciate any help
> >
> >
> >
> >Thanks
> >
> >
> >
> >Kevin
> >
> >_______________________________________________________________________
> >Subscription information may be found at:
> >http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:28 GMT-3