Using Dialer Profile as OSPF Demand-circuit

From: Lai, Ben (benlai_cn@hotmail.com)
Date: Sat Dec 18 2004 - 21:49:10 GMT-3

Hi all,

Here's a problem I met when using ISDN Dialer Profile for OSPF
demand-circuit, It was:

There are two router running OSPF with a serial interface and a BRI
interface. Running AREA 0 between Serials and a virtual link area between
BRIs, When I using the Phycisal BRI interface with the Demand-circuit
function, It works well, But when I use the Dialer profile with the PPP
Multilink, the ISDN link keeps up and down. I debug ip ospf hello, there's
no hello packet pass the Dialer OR BRI interface, but the dial reason is
"s="my ip add, d=224.0.0.5". Anybody could tell me why?

 

Thanks

 

Ben

This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:28 GMT-3