From: Brian Dennis (bdennis@internetworkexpert.com)
Date: Wed Dec 15 2004 - 13:52:11 GMT-3
Yes, when using storm-control you need to pay attention to the speed of
the port. Your solution could technically be correct when you apply it,
but not correct at the end of the lab (i.e. they had you switch from 10
to 100meg later in the lab).
Brian Dennis, CCIE #2210 (R&S/ISP-Dial/Security)
bdennis@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Direct: 775-745-6404 (Outside the US and Canada)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Mike Flanagan
Sent: Wednesday, December 15, 2004 8:10 AM
To: Ccielab
Subject: IE Lab 12 task 1.10 - 1.12
Hello,
This task states that you should limit your bandwidth to 3 Mbps. The
solution has you configure storm-control unicast level 30.00. This
solution
would be ok if you have a 10 mbps link but if you had a Fast E link the
answer would be storm-control unicast level 3 correct ?
Thanks,
Mike F.
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:27 GMT-3