RE: ospf discontinuous areas

From: Henk de Tombe (henk.de.tombe@qi.nl)
Date: Tue Dec 14 2004 - 05:32:24 GMT-3

• Next message: ccie zeng: ""no ip redirects" [SECOND TRY]"
• Previous message: Joseph Rinehart: "Re: ospf discontinuous areas"
• Maybe in reply to: Hans None: "ospf discontinuous areas"
• Next in thread: ccie2be: "Re: ospf discontinuous areas"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Hans,

Routing between the partitioned area's (non area 0) will work. Inter-area
instead of intra-area routing will be used to get from a partioned area to
the other. You will get problems if the partioned area's advertise the same
subnet (see E-mail of Brian Dennis).

Regards,
Henk

-----Oorspronkelijk bericht-----
Van: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Namens Hans None
Verzonden: dinsdag 14 december 2004 05:10
Aan: ccielab@groupstudy.com
Onderwerp: ospf discontinuous areas

All,

Can ospf discontinuous areas work properly (non area 0).

For example, there are multiple area 1 which are discontinuous to each
other. Will this work properly?

Thanks,

• Next message: ccie zeng: ""no ip redirects" [SECOND TRY]"
• Previous message: Joseph Rinehart: "Re: ospf discontinuous areas"
• Maybe in reply to: Hans None: "ospf discontinuous areas"
• Next in thread: ccie2be: "Re: ospf discontinuous areas"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:26 GMT-3