From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Sun Dec 12 2004 - 18:25:21 GMT-3
Mike,
It may or may not be the directly connected switch that is
comparing it to. It simply looks at the priority of the current root
and sets the local bridge's priority lower.
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Mike Flanagan
> Sent: Sunday, December 12, 2004 9:28 AM
> To: Ccielab
> Subject: IE Lab 11 task 1.7 - 1.8
>
> In this task another way to get SW1 to be the spanning tree root
> for the odd numbered VLAN's is with the
>
> spanning-tree vlan <#> root primary command correct ? This command
will
> Lower the bridge priority to a lower value than the next directly
> connected
> switch to ensure this right ? Just making sure I have it right :)
>
>
> Thanks,
>
> Mike F.
>
>
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:26 GMT-3