From: Ting Wang (wangting@huawei-3com.com)
Date: Fri Dec 10 2004 - 08:09:10 GMT-3
Hi ,
I can't find the Service-policy on multilink interface, which is the
bundle of several channel of cE1 card. Is there anyone know the reason?
Taylor
-----SJ<~T-<~-----
7"<~HK: nobody@groupstudy.com [mailto:nobody@groupstudy.com] 4z1m
jatinder.p.singh@bt.com
7"KMJ1<d: 2004Dj12TB6HU 17:31
JU<~HK: david_ccie@hotmail.com
3-KM: ccielab@groupstudy.com
VwLb: RE: Service-policy on ATM interface
David,
After atm interface go to PVC command and than apply service policy
command..
Regards
J P Singh
CCIE :- 13620
BT Global Services
Tel: +44 1732 224277
Fax: +44 1732 873984
Mobile: +44 7714679890
E-mail: jatinder.p.singh@bt.com
www.bt.com
British Telecommunications plc
Registered office: 81 Newgate Street London EC1A 7AJ
Registered in England no. 1800000.
This electronic message contains information from British
Telecommunications plc which may be privileged or confidential. The
information is intended to be for the use of the individual(s) or entity
named above. If you are not the intended recipient be aware that any
disclosure, copying, distribution or use of the contents of this
information is prohibited. If you have received this electronic message
in error, please notify us by telephone or email (to the numbers or
address above) immediately.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
David Duncon
Sent: 06 December 2004 08:19
To: ccielab@groupstudy.com
Subject: Service-policy on ATM interface
Hi Group,
I am trying to apply a CBWFQ on an ATM interface to control the Ingress
feed
and when I tried to apply the service policy command , I am getting the
following errors.
In the end I could apply service policy neither inbound nor outbound.
I appreciate any feed back on this issue.
Rack01R6(config)#int atm0/0
Rack01R6(config-if)#service-policy inp
Rack01R6(config-if)#service-policy input limit Rack01R6(config-if)# *Mar
1 06:16:05.458: CBWFQ : Can be enabled as an output feature only
Rack01R6(config-if)#service-policy output limit CBWFQ : Not supported on
this interface Rack01R6(config-if)#
Cheers
- David.
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:26 GMT-3