From: Keane, James (James.Keane@agriculture.gov.ie)
Date: Thu Dec 09 2004 - 13:11:42 GMT-3
I was asked a fairly straightforward question yesterday
quote
'let's say you are only allowed to send odd
VLANs, 3,5,7,9,11, over a trunk, how about the default VLAN ? I think you cannot disallow the default VLAN 1 unless you set the native VLAN to
something else, is that right ?'
unquote
I responded with sure you cant disable the vlan you are trunking on .. but I'll just verify that in the lab...
To my astonishment I was able to completely remove vlan 1 from the trunk while keeping my native vlan as 1..
now the trunk mode on one side reads 'n-802.1q' and '802.1q' on the other. Not quite sure what the n-802.1q is all about ??!
What is going on ?
One more final thing is buggin me - the default vlan is one and the native vlan is one - you can change the native ...
... can you change the default ???
I thought I understood this topic (grrrr)
Any light on this would be greatly appreciated
I am going back to practical studies II to revise the basics !!!
Regards,
James Keane
**********************************************************************
*********** Department of Agriculture and Food ***************
The information contained in this email and in any
attachments is confidential and is designated solely
for the attention and use of the intended recipient(s).
This information may be subject to legal and professional
privilege. If you are not an intended recipient of
this email, you must not use, disclose, copy,
distribute or retain this message or any part of it.
If you have received this email in error, please
notify the sender immediately and delete all copies of
this email from your computer system(s).
**********************************************************************
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:25 GMT-3