From: Kevin Minihane (kevin.minihane@eirteic.com)
Date: Thu Dec 09 2004 - 09:44:54 GMT-3
Hi
Apologies for the OT. I have a Catalyst 3550, 24 port with EMI Image, and
am getting the following error message (or at least I'm assuming it's an
error message) when it boots up. I also get the same message whenever I
type the command "show version"
Does anyone have any ideas what might be causing this message to appear?
The error appears as the last line in the show version output
3550_2#show version
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(12c)EA1, RELEASE
SOFTWARE
(fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Mon 25-Nov-02 00:07 by antonino
Image text-base: 0x00003000, data-base: 0x0075FE48
ROM: Bootstrap program is C3550 boot loader
3550_2 uptime is 5 minutes
System returned to ROM by power-on
System image file is
"flash:c3550-i5q3l2-mz.121-12c.EA1/c3550-i5q3l2-mz.121-12c.
EA1.bin"
cisco WS-C3550-24 (PowerPC) processor (revision H0) with 65526K/8192K bytes
of m
emory.
Processor board ID CHK0710W10H
Last reset from warm-reset
Bridging software.
Running Layer2/3 Switching Image
Ethernet-controller 1 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 2 has 12 Fast Ethernet/IEEE 802.3 interfaces
Ethernet-controller 3 has 1 Gigabit Ethernet/IEEE 802.3 interface
Ethernet-controller 3 failed POST
POST error status : external RAM test failed
Ethernet-controller 4 has 1 Gigabit Ethernet/IEEE 802.3 interface
The password-recovery mechanism is enabled.
384K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0C:30:FD:F1:80
Motherboard assembly number: 73-5700-10
Power supply part number: 34-0966-04
Motherboard serial number: CAT0709078T
Power supply serial number: DCA06511XCV
Model revision number: H0
Motherboard revision number: A0
Model number: WS-C3550-24-EMI
System serial number: CHK0710W10H
Configuration register is 0x10F
!!! WARNING: The switch is not usable !!!
Thanks in advance
Kevin
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:25 GMT-3