"isdn caller xxxx" command in real world situation

From: Tomikawa (h-tomikawa@syscomusa.com)
Date: Wed Dec 08 2004 - 17:25:38 GMT-3

• Next message: Zimia123@aol.com: "Re: "isdn caller xxxx" command in real world situation"
• Previous message: Brian McGahan: "RE: acl's applied outbound"
• Next in thread: Zimia123@aol.com: "Re: "isdn caller xxxx" command in real world situation"
• Maybe reply: Zimia123@aol.com: "Re: "isdn caller xxxx" command in real world situation"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi, all.
I have a question regarding this command.
I have RAS router using ISDN PRI to support ISDN backup connection
from remote site branch routers, and Async RAS calls (digital-modem)
from RAS users.
I would like to secure ISDN backup call from only branch site routers,
so I was planning
to put this "isdn caller xxxx" command to restrict only registered ISDN
number.

However, If I enable this command, I believe RAS (Async call) will be
rejected, becasue
RAS users calling number is not configured. (Only remote site ISDN numbers)

Is this correct?

Thanks in advance.

• Next message: Zimia123@aol.com: "Re: "isdn caller xxxx" command in real world situation"
• Previous message: Brian McGahan: "RE: acl's applied outbound"
• Next in thread: Zimia123@aol.com: "Re: "isdn caller xxxx" command in real world situation"
• Maybe reply: Zimia123@aol.com: "Re: "isdn caller xxxx" command in real world situation"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:25 GMT-3