From: Idris, Hashiru Aminu (hashng@yahoo.com)
Date: Tue Dec 07 2004 - 12:05:42 GMT-3
Cisco certification <ccielab@groupstudy.com> wrote: Hi,
You have tried to post to a GroupStudy.com certification mailing list. Because
the server does not recognize you as a confirmed poster, you will be required
to authenticate that you are using a valid e-mail address and are not a
spammer. By confirming this e-mail you certify that you are not sending
Unsolicited Bulk Email (UBE).
PLEASE DO NOT SEND YOUR ORIGINAL MESSAGE AGAIN! BY CONFIRMING THIS EMAIL
YOUR ORIGINAL MESSAGE (WHICH IS NOW QUEUED IN THE SERVER) WILL BE POSTED.
By confirming this e-mail you also certify the following:
1. The message does NOT break Cisco's Non-Disclosure requirements.
2. The message is NOT designed to advertise a commercial product.
3. You understand all postings become property of GroupStudy.com
4. You have searched the archives prior to posting.
5. The message is NOT inflammatory.
6. The message is NOT a test message.
To confirm, simply reply to this message. No editing is necessary. Once
confirmed, you will be able to post without additional confirmations.
Welcome to GroupStudy.com!
First time posters to GroupStudy.com are required to agree to the GroupStudy terms and conditions.
Replying to this email, certifies you have read and agree to the GroupStudy posting guidelines and terms and conditions.
--- Original Message Follows ---
Date: Tue, 7 Dec 2004 07:01:06 -0800 (PST)
From: "Idris, Hashiru Aminu"
Subject: ios caveats?????
To: ccielab@groupstudy.com
practicing policy based routing with bgp, when it comes to injecting default route to the remote peer at the remote AS, the router keeps reloading as soon as i entered the command "neighbor ip-add default-originate".
is my router having problem or is one of the Cisco IOS caveates?
the router output is shown below, as you can see it a 2500 .
and after reloading the the ios sh ver reveals the following message to me .
System returned to ROM by error - Illegal Instruction, PC 0x0>
pls can someone shade some light to this problem and its possible remedy.
TIA
Hashiru
r2(config-router)#neighbor 131.108.255.5 default-originate
r2(config-router)#
=== Flushing messages (00:04:37 UTC Mon Mar 1 1993) ===
Buffered messages:
00:00:12: %SYS-7-NV_BLOCK_INIT: Initalized the geometry of nvram
00:00:14: %LINK-3-UPDOWN: Interface Ethernet0, changed state to up
00:00:14: %LINK-3-UPDOWN: Interface Serial0, changed state to up
00:00:14: %LINK-3-UPDOWN: Interface Serial1, changed state to up
00:00:15: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up
00:00:16: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to up
00:01:54: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to down
00:01:56: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up
00:01:56: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to up
00:01:58: %LINK-5-CHANGED: Interface BRI0, changed state to administratively down
00:01:59: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0, changed state to down
00:02:00: %SYS-5-CONFIG_I: Configured from memory by console
00:02:07: %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to up
00:02:48: %SYS-5-RESTART: System restarted --
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JK8OS-L), Version 12.2(1d), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Sun 03-Feb-02 22:01 by srani
00:03:09: %BGP-5-ADJCHANGE: neighbor 131.108.255.5 Up
00:03:18: %BGP-5-ADJCHANGE: neighbor 131.108.255.1 Up
Queued messages:
Exception: Illegal Instruction at 0x0 (PC)
System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE
(Original message truncated)
---------------------------------
Do you Yahoo!?
Yahoo! Mail - You care about security. So do we.
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:25 GMT-3