From: reo@chavallos.net
Date: Sun Dec 05 2004 - 15:55:27 GMT-3
I do not see this command in 12.3 or 12.2T (using CLI).
At the same time it is `indirectly` mentioned in the docs for there IOSs.
What's the version/platform limitations on this commands?
----- Original Message -----
From: "DaveW" <kapsi1911@hotmail.com>
To: <ccielab@groupstudy.com>
Sent: Saturday, December 04, 2004 6:04 PM
Subject: Re: BGP maximum-path
> Try using bgp bestpath as-path ignore
>
> Dave
> ----- Original Message -----
> From: <reo@chavallos.net>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, December 04, 2004 7:48 PM
> Subject: BGP maximum-path
>
>
> > I know that the subject was discussed here - just cannot find the answer
> in
> > the archives.
> > I successfuly tested maximum-path when AS-PATH is the same:
> > ---
> > Network Next Hop Metric LocPrf Weight Path
> > * 0.0.0.0 172.16.10.2 0 1 i
> > *> 172.16.11.1 0 1 i
> >
> >
> >
> > B* 0.0.0.0/0 [20/0] via 172.16.10.2, 00:00:05
> > [20/0] via 172.16.11.1, 00:00:05
> > ---
> >
> > Here's the question - is there a way to insert multiple routes into the
> > routing table when AS-PATH is different?
> >
> > Thanks
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:24 GMT-3