From: Keane, James (James.Keane@agriculture.gov.ie)
Date: Sun Dec 05 2004 - 07:05:31 GMT-3
Yes
Dialer pool and dialer pool member enable you to have multiple logical profiles (dialer interfaces) for a single BRI
Typing - Dialer rotary-group 1 automatically creates 'dialer interface 1' - put in 'dialer in-band'
you can have several physical interfaces belonging to a single logical rotary-group (this seems to be referred to legacyDDR)
We have 2 E1 Primary Rates - which enables us to receive up to 60 calls simualtanuously.
James
-----Original Message-----
From: David Duncon [mailto:david_ccie@hotmail.com]
Sent: 05 December 2004 02:26
To: ccielab@groupstudy.com
Subject: Dialer pool/pool member vs dialer rotary-group x and dialer
in-band
Hello Group,
As we know with the dialer interfaces , we got use dialer pool and dialer pool member commands to tie down with the dialer interfaces with
corresponding BRI physical interfaces. With out them , can dialer and bri ints work with dialer rotary group x and dialer in-band commands as
mentioned below instead ?
Interface bri0/0
Dialer rotary-group 1
Interface dialer0
Dialer in-band
I really appreciate the reasons behind Yes and No !!!
Cheers ,
- David.
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:24 GMT-3