From: Georg Pauwen (pauwen@hotmail.com)
Date: Wed Dec 01 2004 - 09:27:19 GMT-3
Hello Rohan,
for OSPF, it depends on what you change first: if you change the
hello-interval, the dead-timer automatically changes to 4 times that value.
If you change the dead-interval, the hello-interval does not change.
The RIP timers can all be set individually, changing one does not influence
the others.
HTH,
Georg
>From: "Rohan Grover" <rohang@cisco.com>
>Reply-To: "Rohan Grover" <rohang@cisco.com>
>To: "'Cisco certification'" <ccielab@groupstudy.com>
>Subject: RIP OSPF Timers
>Date: Wed, 1 Dec 2004 17:32:47 +0530
>
>Hi,
>
>If the question asks to change the OSPF hello timer or the RIP update
>timer, is it also necessary to change all related timers? Like
>the holddown/flush timers on RIP?
>
>Also I assume that the timers will be changed on all routers in the RIP
>doamin/ OSPF area?
>
>Thanks
>Rohan
>
>_______________________________________________________________________
>Subscription information may be found at:
>http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:23 GMT-3