From: Rohan Grover (rohang@cisco.com)
Date: Wed Dec 01 2004 - 08:06:28 GMT-3
Hi,
I have following configuration
=====================
class-map match-all CLASSB
match access-group 101
class-map match-all CLASSA
match access-group 102
!
!
policy-map QOS
class CLASSA
bandwidth 16
class CLASSB
bandwidth 32
class class-default
bandwidth 16
queue-limit 40
!
interface Serial2/0
ip address 150.50.100.4 255.255.255.0
service-policy output QOS
encapsulation frame-relay
frame-relay map ip 150.50.100.1 102 broadcast
frame-relay map ip 150.50.100.2 102 broadcast
frame-relay map ip 150.50.100.3 102 broadcast
frame-relay map ip 150.50.100.4 102
no frame-relay inverse-arp
!
map-class frame-relay ROHAN
service-policy output QOS
access-list 101 permit tcp any any eq ftp
access-list 101 permit tcp any any eq ftp-data
access-list 101 permit icmp any any
access-list 101 permit tcp any any eq www
access-list 102 permit ip any 172.16.136.0 0.0.0.255
============================
With 'service-policy' directly applied to the fr interface I can see the o/p
=========
R4#sh policy-map interface s2/0
Serial2/0
Service-policy output: QOS
Class-map: CLASSA (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 102
Queueing
Output Queue: Conversation 265
Bandwidth 16 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 0/0
(depth/total drops/no-buffer drops) 0/0/0
Class-map: CLASSB (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group 101
Queueing
Output Queue: Conversation 266
Bandwidth 32 (kbps) Max Threshold 64 (packets)
(pkts matched/bytes matched) 0/0
(depth/total drops/no-buffer drops) 0/0/0
Class-map: class-default (match-any)
14 packets, 182 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
Queueing
Output Queue: Conversation 267
Bandwidth 16 (kbps) Max Threshold 40 (packets)
(pkts matched/bytes matched) 0/0
(depth/total drops/no-buffer drops) 0/0/0
R4#
========
But when I apply 'frame-relay class ROHAN' to the fr interface the o/p of the above command shows nothing. Am I doing something
wrong? I thought this is how MQC works with FR.
Also service-policy applied to a FR main int, is it propagated to the subints. I find that it is not so. Is that correct behavior?
Thanks
Rohan
This archive was generated by hypermail 2.1.4 : Mon Jan 03 2005 - 10:31:23 GMT-3