From: Ahmed Hassan (ahmed_hassan@rayatelecom.net)
Date: Tue Nov 30 2004 - 07:59:36 GMT-3
Dear All
Currently I'm working In an ISP that have a network based On CISCO MGXs
8850, 7200, RPMs. We have a new Project that need to connect various
ADSL customers to our network VIA PPPOA, each of these customers will be
assigned a unique virtual circuit. And a unique sub interface. Those
customers are assigned to a virtual template and are authenticated VIA
RADIUS. Our challenge is the Following:-
We want to configure the customer in BULK such we do it once, when each
customer authenticating from the radius it can assigned different ip
address's based on the authentication, Also I want the parameters of the
ATM VC(like VBR,CBR) to be changed based on the customer user name and
the password. Or can I control the speed of the customer based on a
unique parameter on the virtual Templates. Is it also feasible to change
the VC Parameters on the MGX
Any Good ideas, links, configuration examples are very welcome.
Best Regards
Ahmed Hassan
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:51 GMT-3