RE : OSPF DDR: Dialer up, but encapsulation failed

From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Mon Nov 29 2004 - 00:13:03 GMT-3

Next message: Nki: "LAN QoS"
Previous message: jasonyeung@21cn.net: "OSPF DDR: Dialer up, but encapsulation failed"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Jason,

I can't see "dialer pool-member" on interface bri of router Kevin, is it
there ?

Also, it is recommended to put "ppp authentication chap" on the bri
interfaces too,

Let me know how it goes,

-- Richard

-----Message d'origine-----
De : jasonyeung@21cn.net [mailto:jasonyeung@21cn.net]
Envoyi : Monday, November 29, 2004 3:57 AM
@ : ccielab@groupstudy.com
Objet : OSPF DDR: Dialer up, but encapsulation failed

Dear all,

I did a step by step practice of
http://www.cisco.com/en/US/tech/tk801/tk133/technologies_configuration_examp
le09186a008009455e.shtml

The show running are:

krimson#s
Building configuration...

Current configuration : 1658 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname krimson
!
!
username kevin password 0 test1
ip subnet-zero
!
!
no ip domain lookup
!
isdn switch-type basic-net3
!
interface Loopback0
ip address 10.8.8.1 255.255.255.0
ip ospf network point-to-point
!
interface Ethernet0/0
no ip address
shutdown
half-duplex
!
interface BRI0/0
description ISDN # 25583923
no ip address
encapsulation ppp
load-interval 30
dialer pool-member 1
isdn switch-type basic-net3
no keepalive
!
interface Serial0/0
no ip address
encapsulation frame-relay
no fair-queue
!
interface Serial0/0.1 point-to-point
ip address 10.5.5.1 255.255.255.0
frame-
*Mar 1 00:03:20.448: %SYS-5-CONFIG_I: Configured from console by
consolerelay interface-dlci 30
!
interface Dialer0
mtu 1450
ip address 10.9.9.1 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name kevin
dialer string 25583917
dialer watch-group 1
dialer-group 1
ppp authentication chap
!
interface Dialer1
no ip address
no cdp enable
!
router ospf 1
log-adjacency-changes
network 10.5.5.0 0.0.0.255 area 0
network 10.8.8.0 0.0.0.255 area 0
network 10.9.9.0 0.0.0.255 area 0
!
ip http server
ip classless
!
!
access-list 101 deny ospf any any
access-list 101 permit ip any any
dialer watch-list 1 ip 10.7.7.0 255.255.255.0
dialer-list 1 protocol ip list 101
!
!
!
!
!
alias exec c configur t
alias exec s show run
alias exec sir show ip rout
alias exec sib show ip int brie
alias exec u undeb all
!
line con 0
line aux 0
line vty 0 4
login
!
!
!
end

krimson#
TermServer#2
[Resuming connection 2 to r9 ... ]
s
% Ambiguous command: "s"
kevin(config-if)#^Z
kevin#s
Building configuration...

Current configuration : 1945 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname kevin
!
!
username krimson password 0 test1
ip subnet-zero
!
!
no ip domain lookup
!
mpls ldp logging neighbor-changes
isdn switch-type basic-net3
!
!
interface Loopback0
ip address 10.7.7.1 255.255.255.0
ip ospf network point-to-point
!
interface Serial0/0
no ip address
encapsulation frame-relay
clockrate 4000000
no fair-queue
!
interface Serial0/0.1 point-to-point
ip address 10.5.5.2 255.255.255.0
frame-relay interface-dlci 20
!
interface BRI0/0
description ISDN # 25583917
no ip address
encap
*Mar 1 00:04:17.116: %SYS-5-CONFIG_I: Configured from console by
consolesulation ppp
load-interval 30
isdn switch-type basic-net3
!
interface Dialer0
mtu 1450
ip address 10.9.9.2 255.255.255.0
encapsulation ppp
dialer pool 1
dialer remote-name krimson
dialer-group 1
ppp authentication chap
!
router ospf 1
log-adjacency-changes
network 10.5.5.0 0.0.0.255 area 0
network 10.7.7.0 0.0.0.255 area 0
network 10.9.9.0 0.0.0.255 area 0
!
ip http server
ip classless
!
!
dialer-list 1 protocol ip permit
!
alias exec sir show ip route
alias exec s show run
alias exec c conf t
alias exec sib show ip int brie
alias exec u undebug all
!
line con 0
line aux 0
line vty 0 4
login
!
!
!
end

and here is the debug message:

Enter configuration commands, one per line. End with CNTL/Z.
krimson(config)#int s0/0
krimson(config-if)#sh
krimson(config-if)#
*Mar 1 00:03:59.680: %OSPF-5-ADJCHG: Process 1, Nbr 10.7.7.1 on Serial0/0.1
from FULL to DOWN, Neighbor Down: Interface down or detached
*Mar 1 00:03:59.692: DDR: Dialer Watch: watch-group = 1
*Mar 1 00:03:59.692: DDR: network 10.7.7.0/255.255.255.0 DOWN,
*Mar 1 00:03:59.692: DDR: primary DOWN
*Mar 1 00:03:59.692: DDR: Dialer Watch: Dial Reason: Primary of group 1
DOWN
*Mar 1 00:03:59.692: DDR: Dialer Watch: watch-group = 1,
*Mar 1 00:03:59.692: BR0/0 DDR: rotor dialout [best] least recent failure
is also most recent failure
*Mar 1 00:03:59.696: BR0/0 DDR: rotor dialout [best] trying untried dialout
*Mar 1 00:03:59.696: BR0/0 DDR: rotor dialout [best] also has most recent
failure
*Mar 1 00:03:59.696: BR0/0 DDR: rotor dialout [best]
*Mar 1 00:03:59.696: DDR: dialing secondary by dialer string
25583917 on Di0
*Mar 1 00:03:59.696: BR0/0 DDR: Attempting to dial 25583917
*Mar 1 00:04:00.061: %LINK-3-UPDOWN: Interface BRI0/0:2, changed state to
up
*Mar 1 00:04:00.061: BR0/0:2 DDR: Dialer Watch: resetting call in progress
*Mar 1 00:04:00.065: BR0/0:2: interface must be fifo queue, force fifo
*Mar 1 00:04:00.065: %DIALER-6-BIND: Interface BR0/0:2 bound to profile Di0
*Mar 1 00:04:00.069: BR0/0:2 PPP: Using dialer call direction
*Mar 1 00:04:00.073: BR0/0:2 PPP: Treating connection as a callout
*Mar 1 00:04:00.073: BR0/0:2 PPP: Authorization required
*Mar 1 00:04:00.085: BR0/0:2 CHAP: O CHALLENGE id 1 len 28 from "krimson"
*Mar 1 00:04:00.105: BR0/0:2 CHAP: I RESPONSE id 1 len 26 from "kevin"
*Mar 1 00:04:00.105: BR0/0:2 PPP: Sent CHAP LOGIN Request
*Mar 1 00:04:00.109: BR0/0:2 PPP: Received LOGIN Response PASS
*Mar 1 00:04:00.109: BR0/0:2 DDR: Remote name for kevin
*Mar 1 00:04:00.113: BR0/0:2 PPP: Sent LCP AUTHOR Request
*Mar 1 00:04:00.113: BR0/0:2 LCP: Received AAA AUTHOR Response PASS
*Mar 1 00:04:00.113: BR0/0:2 CHAP: O SUCCESS id 1 len 4
*Mar 1 00:04:01.119: %LINEPROTO-5-UPDOWN: Line protocol on Interface
BRI0/0:2, changed state to up
*Mar 1 00:04:01.676: %LINK-5-CHANGED: Interface Serial0/0, changed state to
administratively down
*Mar 1 00:04:02.677: %LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial0/0, changed state to down
krimson(config-if)#^Z
krimson#
*Mar 1 00:04:05.858: %SYS-5-CONFIG_I: Configured from console by console
*Mar 1 00:04:06.071: %ISDN-6-CONNECT: Interface BRI0/0:2 is now connected
to 25583917 kevin
krimson#sh isdn ac
----------------------------------------------------------------------------

---- ISDN ACTIVE CALLS ---------------------------------------------------------------------------- ---- Call Calling Called Remote Seconds Seconds Seconds Charges Type Number Number Name Used Left Idle Units/Currency ---------------------------------------------------------------------------- ---- Out ---N/A--- 25583917 kevin 12 107 12 0

---------------------------------------------------------------------------- ----

krimson#sh isdn ac ---------------------------------------------------------------------------- ---- ISDN ACTIVE CALLS ---------------------------------------------------------------------------- ---- Call Calling Called Remote Seconds Seconds Seconds Charges Type Number Number Name Used Left Idle Units/Currency ---------------------------------------------------------------------------- ---- Out ---N/A--- 25583917 kevin 15 104 15 0

---------------------------------------------------------------------------- ----

krimson#de krimson#debg krimson#debu krimson#debug ip pac de IP packet debugging is on (detailed) krimson# krimson# *Mar 1 00:04:32.278: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:04:32.278: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 krimson#^Z krimson#sh is *Mar 1 00:04:42.278: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:04:42.278: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89dn statu krimson#sh isdn status Global ISDN Switchtype = basic-net3 ISDN BRI0/0 interface dsl 0, interface ISDN Switchtype = basic-net3 Layer 1 Status: ACTIVE Layer 2 Status: TEI = 70, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED Layer 3 Status: 1 Active Layer 3 Call(s) CCB:callid=8005, sapi=0, ces=1, B-chan=2, calltype=DATA, hdlctype=HDLC-TRUNK Active dsl 0 CCBs = 1 The Free Channel Mask: 0x80000001 Total Allocated ISDN CCBs = 1 krimson# krimson# krimson# *Mar 1 00:04:52.278: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:04:52.278: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 krimson# krimson# krimson# krimson# *Mar 1 00:05:02.279: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:05:02.279: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 krimson#isdn test dis krimson#isdn test disconnect int bri0/0 all krimson# *Mar 1 00:05:12.279: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:05:12.279: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 *Mar 1 00:05:13.714: BR0/0:1 DDR: disconnecting call *Mar 1 00:05:13.714: BR0/0:2 DDR: disconnecting call *Mar 1 00:05:13.714: BR0/0:2 DDR: Dialer Watch: resetting call in progress *Mar 1 00:05:13.714: DDR: Dialer Watch: watch-group = 1 *Mar 1 00:05:13.714: DDR: network 10.7.7.0/255.255.255.0 DOWN, *Mar 1 00:05:13.714: DDR: primary DOWN *Mar 1 00:05:13.718: %ISDN-6-DISCONNECT: Interface BRI0/0:2 disconnected from 25583917 kevin, call lasted 73 seconds *Mar 1 00:05:13.826: %LINK-3-UPDOWN: Interface BRI0/0:2, changed state to down *Mar 1 00:05:13.826: BR0/0 DDR: has total 0 call(s), dial_out 0, dial_in 0 *Mar 1 00:05:13.830: BR0/0:2 DDR: disconnecting call *Mar 1 00:05:13.830: DDR: Dialer Watch: watch-group = 1 *Mar 1 00:05:13.830: DDR: network 10.7.7.0/255.255.255.0 DOWN, *Mar 1 00:05:13.830: DDR: primary DOWN *Mar 1 00:05:13.830: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN *Mar 1 00:05:13.834: DDR: Dialer Watch: watch-group = 1, *Mar 1 00:05:13.834: BR0/0 DDR: rotor dialout [best] least recent failure is also most recent failure *Mar 1 00:05:13.834: BR0/0 DDR: rotor dialout [best] trying untried dialout *Mar 1 00:05:13.834: BR0/0 DDR: rotor dialout [best] also has most recent failure *Mar 1 00:05:13.834: BR0/0 DDR: rotor dialout [best] *Mar 1 00:05:13.834: DDR: dialing secondary by dialer string 25583917 on Di0 *Mar 1 00:05:13.834: BR0/0 DDR: Attempting to dial 25583917 *Mar 1 00:05:13.838: BR0/0:2 DDR: disconnecting call *Mar 1 00:05:13.838: DDR: Dialer Watch: watch-group = 1 *Mar 1 00:05:13.838: DDR: network 10.7.7.0/255.255.255.0 DOWN, *Mar 1 00:05:13.838: DDR krimson#: primary DOWN *Mar 1 00:05:13.838: DDR: Dialer Watch: Dial Reason: Secondary of group 1 DOWN *Mar 1 00:05:13.838: DDR: Dialer Watch: watch-group = 1, *Mar 1 00:05:13.838: %DIALER-6-UNBIND: Interface BR0/0:2 unbound from profile Di0 *Mar 1 00:05:14.210: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to up *Mar 1 00:05:14.214: BR0/0:1 DDR: Dialer Watch: resetting call in progress *Mar 1 00:05:14.214: BR0/0:1: interface must be fifo queue, force fifo *Mar 1 00:05:14.214: %DIALER-6-BIND: Interface BR0/0:1 bound to profile Di0 *Mar 1 00:05:14.222: BR0/0:1 PPP: Using dialer call direction *Mar 1 00:05:14.222: BR0/0:1 PPP: Treating connection as a callout *Mar 1 00:05:14.222: BR0/0:1 PPP: Authorization required *Mar 1 00:05:14.238: BR0/0:1 CHAP: O CHALLENGE id 1 len 28 from "krimson" *Mar 1 00:05:14.254: BR0/0:1 CHAP: I RESPONSE id 1 len 26 from "kevin" *Mar 1 00:05:14.254: BR0/0:1 PPP: Sent CHAP LOGIN Request *Mar 1 00:05:14.258: BR0/0:1 PPP: Received LOGIN Response PASS *Mar 1 00:05:14.258: BR0/0:1 DDR: Remote name for kevin *Mar 1 00:05:14.262: BR0/0:1 PPP: Sent LCP AUTHOR Request *Mar 1 00:05:14.262: BR0/0:1 LCP: Received AAA AUTHOR Response PASS *Mar 1 00:05:14.262: BR0/0:1 CHAP: O SUCCESS id 1 len 4 *Mar 1 00:05:14.827: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:2, changed state to down *Mar 1 00:05:15.268: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed state to up krimson# krimson# *Mar 1 00:05:20.220: %ISDN-6-CONNECT: Interface BRI0/0:1 is now connected to 25583917 kevin krimson# krimson# *Mar 1 00:05:22.280: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:05:22.280: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 krimson# krimson# krimson#c Enter configuration commands, one per line. End with CNTL/Z. krimson(config)#int s0/0 krimson(config-if)#no % Incomplete command.

krimson(config-if)#no *Mar 1 00:05:32.280: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:05:32.280: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 sh krimson(config-if)# krimson(config-if)# krimson(config-if)# *Mar 1 00:05:34.516: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 76, sending broad/multicast, proto=89^Z krimson# *Mar 1 00:05:36.515: %LINK-3-UPDOWN: Interface Serial0/0, changed state to up krimson# *Mar 1 00:05:36.555: %SYS-5-CONFIG_I: Configured from console by console *Mar 1 00:05:37.517: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0, changed state to up krimson#sir Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

10.0.0.0/24 is subnetted, 2 subnets C 10.9.9.0 is directly connected, Dialer0 C 10.8.8.0 is directly connected, Loopback0 krimson#s *Mar 1 00:05:42.280: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:05:42.280: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89h isdn krimson#sh isdn ac ---------------------------------------------------------------------------- ---- ISDN ACTIVE CALLS ---------------------------------------------------------------------------- ---- Call Calling Called Remote Seconds Seconds Seconds Charges Type Number Number Name Used Left Idle Units/Currency ---------------------------------------------------------------------------- ---- Out ---N/A--- 25583917 kevin 31 88 31 0

---------------------------------------------------------------------------- ----

krimson# *Mar 1 00:05:46.523: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 76, sending broad/multicast, proto=89isdn krimson#isdn test di krimson#isdn test disconnect in *Mar 1 00:05:52.281: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:05:52.281: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 *Mar 1 00:05:53.002: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 76, rcvd 0, proto=89 krimson#isdn test disconnect in *Mar 1 00:05:56.524: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast, proto=89 *Mar 1 00:05:56.608: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 64, rcvd 0, proto=89 *Mar 1 00:05:56.612: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 64, sending broad/multicast, proto=89 *Mar 1 00:05:56.712: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 104, rcvd 0, proto=89 *Mar 1 00:05:56.712: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 104, sending broad/multicast, proto=89 *Mar 1 00:05:56.716: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 56, sending broad/multicast, proto=89 *Mar 1 00:05:56.812: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 64, rcvd 0, proto=89 *Mar 1 00:05:56.812: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 56, rcvd 0, proto=89 *Mar 1 00:05:56.812: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 108, rcvd 0, proto=89 *Mar 1 00:05:56.816: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 64, sending broad/multicast, proto=89 *Mar 1 00:05:56.816: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 108, sending broad/multicast, proto=89 *Mar 1 00:05:56.908: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 64, rcvd 0, proto=89 *Mar 1 00:05:56.912: %OSPF-5-ADJCHG: Process 1, Nbr 10.7.7.1 on Serial0/0.1 from LOADING to FULL, Loading Done *Mar 1 00:05:57.413: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 120, sending broad/multicast, proto=89 krimson# *Mar 1 00:05:59.316: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 120, rcvd 0, proto=89 *Mar 1 00:05:59.320: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 84, sending broad/multicast, proto=89 *Mar 1 00:05:59.413: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 64, rcvd 0, proto=89 krimson# *Mar 1 00:06:02.281: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:06:02.281: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 *Mar 1 00:06:02.309: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 120, sending broad/multicast, proto=89 *Mar 1 00:06:02.918: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 80, rcvd 0, proto=89 krimson# *Mar 1 00:06:04.922: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 64, rcvd 0, proto=89so krimson#so krimson#s *Mar 1 00:06:06.524: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast, proto=8 krimson# krimson#sh ip os nei

Neighbor ID Pri State Dead Time Address Interface 10.7.7.1 0 FULL/ - 00:00:32 10.5.5.2 Serial0/0.1 krimson# *Mar 1 00:06:12.282: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:06:12.282: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 *Mar 1 00:06:12.851: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 80, rcvd 0, proto=89 krimson# krimson#sir Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

10.0.0.0/24 is subnetted, 4 subnets C 10.9.9.0 is directly connected, Dialer0 C 10.8.8.0 is directly connected, Loopback0 O 10.7.7.0 [110/65] via 10.5.5.2, 00:00:17, Serial0/0.1 C 10.5.5.0 is directly connected, Serial0/0.1 krimson# *Mar 1 00:06:16.525: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast, proto=89 krimson#sh isdn ac ---------------------------------------------------------------------------- ---- ISDN ACTIVE CALLS ---------------------------------------------------------------------------- ---- Call Calling Called Remote Seconds Seconds Seconds Charges Type Number Number Name Used Left Idle Units/Currency ---------------------------------------------------------------------------- ---- Out ---N/A--- 25583917 kevin 68 51 68 0

---------------------------------------------------------------------------- ----

krimson# *Mar 1 00:06:22.282: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:06:22.282: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 *Mar 1 00:06:22.855: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 80, rcvd 0, proto=89 krimson#c Enter configuration commands, one per line. End with CNTL/Z. krimson(config)#int *Mar 1 00:06:26.525: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast, proto=8^Z % Incomplete command.

krimson#^Z krimson#isdn *Mar 1 00:06:29.414: %SYS-5-CONFIG_I: Configured from console by console test d *Mar 1 00:06:32.282: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:06:32.282: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 *Mar 1 00:06:32.871: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 80, rcvd 0, proto=89is krimson#isdn test disconnect int bri 0/ *Mar 1 00:06:36.525: IP: s=10.5.5.1 (local), d=224.0.0.5 (Serial0/0.1), len 80, sending broad/multicast, proto=890 all krimson# krimson# *Mar 1 00:06:39.302: BR0/0:1 DDR: disconnecting call *Mar 1 00:06:39.306: BR0/0:1 DDR: Dialer Watch: resetting call in progress *Mar 1 00:06:39.306: DDR: Dialer Watch: watch-group = 1 *Mar 1 00:06:39.306: DDR: network 10.7.7.0/255.255.255.0 UP, *Mar 1 00:06:39.306: DDR: primary UP *Mar 1 00:06:39.306: BR0/0:2 DDR: disconnecting call *Mar 1 00:06:39.310: %ISDN-6-DISCONNECT: Interface BRI0/0:1 disconnected from 25583917 kevin, call lasted 85 seconds *Mar 1 00:06:39.418: %LINK-3-UPDOWN: Interface BRI0/0:1, changed state to down *Mar 1 00:06:39.422: BR0/0 DDR: has total 0 call(s), dial_out 0, dial_in 0 *Mar 1 00:06:39.422: %DIALER-6-UNBIND: Interface BR0/0:1 unbound from profile Di0 *Mar 1 00:06:39.426: BR0/0:1 DDR: disconnecting call *Mar 1 00:06:40.420: %LINEPROTO-5-UPDOWN: Line protocol on Interface BRI0/0:1, changed state to down krimson# krimson# krimson# *Mar 1 00:06:42.283: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, sending broad/multicast, proto=89 *Mar 1 00:06:42.283: IP: s=10.9.9.1 (local), d=224.0.0.5 (Dialer0), len 76, encapsulation failed, proto=89 *Mar 1 00:06:42.888: IP: s=10.5.5.2 (Serial0/0.1), d=224.0.0.5, len 80, rcvd 0, proto=89u All possible debugging has been turned off

Cheers, Jason YEUNG

Next message: Nki: "LAN QoS"
Previous message: jasonyeung@21cn.net: "OSPF DDR: Dialer up, but encapsulation failed"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:50 GMT-3