From: amilabs (amilabs@optonline.net)
Date: Tue Nov 23 2004 - 17:15:24 GMT-3
TTCP?
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Edwards, Andrew M
Sent: Tuesday, November 23, 2004 1:51 PM
To: ccie2be; Group Study
Subject: RE: Using IOS to generate a specific volume of traffic
Tim,
I know SAA is a good tool to generate traffic of various types. Can be very
useful to verify configuration if you have the time to throw it together.
They do have some new 12.2T Framerelay type definitions for SLA monitoring,
but my quick glance did not reveal that it has a "traffic generator for a
specified rate" effect... Here's the link though if you want to look
further.
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/
ffun_c/fcfprt3/fcf017.htm
Andy
-----Original Message-----
From: ccie2be [mailto:ccie2be@nyc.rr.com]
Sent: Tuesday, November 23, 2004 10:24 AM
To: Group Study
Subject: Using IOS to generate a specific volume of traffic
Hi guys,
Is there a tool within IOS that can be used to accurately generate a
given amount of traffic?
For example, suppose I want to test a MQC shaping or policing
configuration and I want to generate a continuous stream of traffic at
65k to see what happens when the cir is 64k. Is there a way to do this
?
I know that by using ping and setting the packet size and repeat count I
can generate traffic, but it seems that using this method doesn't
translate to a specific rate.
TIA, Tim
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:49 GMT-3