RE: DLSW+

From: "Hoonpongsimanont
Date: Mon Nov 22 2004 - 23:56:05 GMT-3

• Next message: DaveW: "dialer watch"
• Previous message: Nico van Niekerk: "FW:DLSW+"
• Maybe in reply to: Nico van Niekerk: "DLSW+"
• Next in thread: Scott Morris: "RE: DLSW+"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

When setting "dlsw icannotreach saps F0" on R1, R1 will tell R2 that it does
not support saps F0 through capability exchange process. Therefore, R2 will
not even send netbios name query or canureach message to R1.

No need that lsap-output-list on R2.

HTH,
David

-----Original Message-----
From: Nico van Niekerk [mailto:nico@vanniekerk.co.za]
Sent: Tuesday, November 23, 2004 9:13 AM
To: CCIELAB
Subject: DLSW+

You have a DLSW peering between R1 and R2. When you configure "dlsw
icannotreach saps F0" on R1, will R2 stop sending NetBIOS to R2? Or do you
need to configure an lsap-output-list on R2 to block the traffic?

• Next message: DaveW: "dialer watch"
• Previous message: Nico van Niekerk: "FW:DLSW+"
• Maybe in reply to: Nico van Niekerk: "DLSW+"
• Next in thread: Scott Morris: "RE: DLSW+"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:49 GMT-3