From: Bob Sinclair (bsin@cox.net)
Date: Mon Nov 22 2004 - 16:59:46 GMT-3
Gladston,
Check out the QoS configuration guidelines at the link below. When
classifying on a 3550 egress port, we can match only on dscp. It is quite
possible, however, that IOS will actually take the command. It seems to
accept lots of meaningless commands without complaint. My favorite example
is the policy-map bandwidth command.
http://www.cisco.com/univercd/cc/td/doc/product/lan/c3550/12120ea2/3550scg/swqos.htm#wp1059073
HTH,
Bob Sinclair
CCIE #10427, CCSI 30427, CISSP
www.netmasterclass.net
----- Original Message -----
From: <gladston@br.ibm.com>
To: <ccielab@groupstudy.com>
Sent: Monday, November 22, 2004 2:41 PM
Subject: Match input-interface on 3550
> Any recommendation of a doc specifying when it is possible to use match
> input-interface?
> It does not work with "set cos X" under police-map and does not work with
> per-port-per-vlan policing.
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:48 GMT-3