From: Scott Morris (swm@emanon.com)
Date: Sat Nov 20 2004 - 12:32:56 GMT-3
That depends on whether your ISDN switch is configured for rollover/hunting
or not. You may be able to achieve the results with only one dialer map.
HTH,
Scott Morris, MCSE, CCDP, CCIE4 (R&S/ISP-Dial/Security/Service Provider)
#4713, JNCIP, CCNA-WAN Switching, CCSP, Cable Communications Specialist, IP
Telephony Support Specialist, IP Telephony Design Specialist, CISSP
CCSI #21903
swm@emanon.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Joe
Chang
Sent: Saturday, November 20, 2004 10:19 AM
To: ccielab@groupstudy.com
Subject: Re: PPP Multilink and dialer idle-timeout
For ppp multilink to work, in your config:
> interface BRI0/0
> ip address 172.16.112.1 255.255.255.0
> encapsulation ppp
> dialer idle-timeout 500
> dialer map ip 172.16.112.2 name r2 8358662 dialer-group 1 isdn
> switch-type basic-ni isdn spid1 0835866101 8358661 isdn spid2
> 0835866301 8358663 ppp authentication chap ppp multilink
you need to add a second dialer map statement pointing to the other B
channel on the other side
for example : dialer map ip 172.16.112.2 name r2 8358664
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:48 GMT-3