IEWB task 4.6-4.8--ppp chap over a serial link.

From: mani poopal (mani_ccie@yahoo.com)
Date: Fri Nov 19 2004 - 13:12:22 GMT-3

• Next message: Mestdagh, Mark [NCSBE - Non JJ]: "RE: Physical/multipoing Serial OSPF authentication different"
• Previous message: yuki hisano: "Is Bandwidth value bi-directional or Uni-directional?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi Guys,
 
I tried to test ppp chap authentication on a point to point serial link. It seems like authentication is not working. Even after removing ppp chap hostname command I can ping the remote peer. When debugging for ppp authenitcation, it seems like authentication is not working. Guys does ppp chap authentication supports over point to point serial link.
 
thanks
 
Mani
======================
username R4_T1 password 0 CISCO
 
interface Serial0
 ip address 204.12.10.254 255.255.255.0
 encapsulation ppp
 no fair-queue
 clockrate 56000
 ppp authentication chap
 ppp chap hostname BB3_T1
======================

B.ENG,A+,CCNA,CCNP,CCNP-VOICE, CSS1,CNA,MCSE
(416)431 9929
MANI_CCIE@YAHOO.COM
                
---------------------------------
Do you Yahoo!?
 Discover all thats new in My Yahoo!

• Next message: Mestdagh, Mark [NCSBE - Non JJ]: "RE: Physical/multipoing Serial OSPF authentication different"
• Previous message: yuki hisano: "Is Bandwidth value bi-directional or Uni-directional?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:47 GMT-3