From: Mike Flanagan (mikenoc@mindspring.com)
Date: Sun Nov 14 2004 - 13:56:34 GMT-3
Hello,
I have a quick question on IE Lab 8 task 1.7. It asks to forward traffic
for all Vlan's over port fa0/14 and to do this config on the root bridge.
Now to find out what the root bridge is couldn9t you just use the show
spanning tree vlan command and if all of the ports are forwarding it is the
root bridge correct ?
Thanks in advance,
Mike F.
Rack1SW2#show spanning-tree vlan 1
VLAN0001
Spanning tree enabled protocol ieee
Root ID Priority 32769
Address 000d.290c.d280
This bridge is the root
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Bridge ID Priority 32769 (priority 32768 sys-id-ext 1)
Address 000d.290c.d280
Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec
Aging Time 300
Interface Role Sts Cost Prio.Nbr Type
---------------- ---- --- --------- --------
--------------------------------
Fa0/13 Desg FWD 19 128.13 P2p
Fa0/14 Desg FWD 19 128.14 P2p
Fa0/15 Desg FWD 19 128.15 P2p
Rack1SW2#
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:45 GMT-3