From: mmaslo@optonline.net
Date: Fri Nov 12 2004 - 22:06:55 GMT-3
Tomek,
These are two independent commands:
1. ip mtu will set the max mtu size on the interface (max size of the packet before the IOS will fragment it) - this is protocol independent
2. ip ospf mtu-ignore - is specific to OSPF only, this command will allow OSPF to ignore MTU size when the adjecency is formed.
I hope this helps.
Matt,
----- Original Message -----
From: Tomasz Siwiarek <siwiarek@poczta.onet.pl>
Date: Friday, November 12, 2004 4:32 pm
Subject: ip ospf mtu-ignore vs. ip mtu 1500
> Hello,
> what is the different between this two commend :
>
> ip ospf mtu-ignore
> and
> ip mtu 1500,
>
> which one is better to use?
> Thank you,
> Tomek
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:42 GMT-3