From: Richard Dumoulin (Richard.Dumoulin@vanco.fr)
Date: Fri Nov 12 2004 - 19:07:19 GMT-3
Anyone knows what the following messages mean in the debug atm events below
?
DSL: Defect: LCDi: retraining
LOCAL:Max noise margin for power cutoff 31
*Mar 3 03:45:07: DSL: Defect: LCDi: retraining
*Mar 3 03:45:08: Resetting ATM0
*Mar 3 03:45:09: DSL: Received response: 0x41
*Mar 3 03:45:09: %LINK-3-UPDOWN: Interface ATM0, changed state to down
*Mar 3 03:45:10: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0,
changed state to down
*Mar 3 03:45:12: DSL: SM: [DMTDSL_SHOWTIME -> DMTDSL_RE_OPEN]
*Mar 3 03:45:12: DSL: Send ADSL_CLOSE command.
*Mar 3 03:45:12: DSL: Sent command 0x4
*Mar 3 03:45:12: DSL: Received response: 0x25
*Mar 3 03:45:12: DSL: Connection closed
*Mar 3 03:45:12: DSL: SM: [DMTDSL_RE_OPEN -> DMTDSL_DO_OPEN]
*Mar 3 03:45:12: DSL: Trying to bring up DSL line using Embedded firmware
version : 3.9.220
*Mar 3 03:45:12: DSL: Send ADSL_OPEN command.
*Mar 3 03:45:12: DSL: Using subfunction 0x15
*Mar 3 03:45:12: DSL: Using subfunction 0x15
*Mar 3 03:45:12: LOCAL:Max noise margin for power cutoff 31
*Mar 3 03:45:12: DSL: Sent command 0x3
*Mar 3 03:45:15: DSL: 1: Modem state = 0x8
*Mar 3 03:45:17: DSL: 2: Modem state = 0x8
*Mar 3 03:45:20: DSL: 3: Modem state = 0x10
*Mar 3 03:45:22: DSL: 4: Modem state = 0x10
*Mar 3 03:45:25: DSL: 5: Modem state = 0x10
*Mar 3 03:45:27: DSL: Received response: 0x24
*Mar 3 03:45:27: DSL: DSL line trained using Embedded firmware version :
3.9.220
*Mar 3 03:45:27: DSL: Showtime!
*Mar 3 03:45:27: DSL: Sent command 0x11
*Mar 3 03:45:27: DSL: Received response: 0x61
*Mar 3 03:45:27: DSL: Read firmware revision 0x1A04
*Mar 3 03:45:27: DSL: Sent command 0x31
*Mar 3 03:45:27: DSL: Received response: 0x12
*Mar 3 03:45:27: DSL: operation mode 0x0002
*Mar 3 03:45:27: DSL: Sent command 0x33
*Mar 3 03:45:27: DSL: Received response: 0x16
*Mar 3 03:45:27: DSL: Far End ITU Country Code 0x00
*Mar 3 03:45:27: DSL: Far End ITU Vendor ID GSPN
*Mar 3 03:45:27: DSL: Far End ITU Vendor ID Specific 0x0003
*Mar 3 03:45:27: DSL: Far End ITU Vendor STD Number 0x0001
*Mar 3 03:45:27: DSL: Sent command 0x32
*Mar 3 03:45:27: DSL: Received response: 0x14
*Mar 3 03:45:27: DSL: Near End ITU Country Code 0x00
*Mar 3 03:45:27: DSL: Near End ITU Vendor ID ALCB
*Mar 3 03:45:27: DSL: Near End ITU Vendor ID Specific 0x0000
*Mar 3 03:45:27: DSL: Near End ITU Vendor STD Number 0x0001
*Mar 3 03:45:27: DSL: SM: [DMTDSL_DO_OPEN -> DMTDSL_SHOWTIME]
*Mar 3 03:45:27: Resetting ATM0
*Mar 3 03:45:29: %LINK-3-UPDOWN: Interface ATM0, changed state to up
*Mar 3 03:45:30: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0,
changed state to up
**********************************************************************
Any opinions expressed in the email are those of the individual and not necessarily the company. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering it to the intended recipient, be advised that you have received this email in error and that any dissemination, distribution, copying or use is strictly prohibited.
If you have received this email in error, or if you are concerned with the content of this email please e-mail to: e-security.support@vanco.info
The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While the sender has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening any attachments to this e-mail.
**********************************************************************
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:42 GMT-3