From: Brian McGahan (bmcgahan@internetworkexpert.com)
Date: Fri Nov 12 2004 - 15:28:13 GMT-3
Li,
Yes you can do this. In order to do this issue the
"maximum-paths" command under the BGP process. Note that the best path
selection must match for all the attributes up to the IGP metric.
For more info see:
http://www.cisco.com/warp/public/459/25.shtml
HTH,
Brian McGahan, CCIE #8593
bmcgahan@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 705
Outside US: 775-826-4344 x 705
24/7 Support: http://forum.internetworkexpert.com
Live Chat: http://www.internetworkexpert.com/chat/
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> libone mhlanga
> Sent: Friday, November 12, 2004 9:17 AM
> To: ccielab@groupstudy.com
> Subject: BGP Gurus out there !!
>
> Is it possible for BGP to do per-packet load-balancing to two
different AS
> numbers ? Put another way does BGP now have the ability to install
two
> routes in the routing table to the same prefix without preferring one
over
> the other ?
>
> Thanks,
>
> Li
> --
> _______________________________________________
> Find what you are looking for with the Lycos Yellow Pages
>
http://r.lycos.com/r/yp_emailfooter/http://yellowpages.lycos.com/default
.a
> sp?SRC=lycos10
>
>
This archive was generated by hypermail 2.1.4 : Thu Dec 02 2004 - 06:57:42 GMT-3